1982 Jeep Scrambler Cj2 Wrangler Pickup on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Weekly Recap For 5.20.16 | Autoblog Minute

Senior Editor Greg Migliore recaps the week in automotive news, including a look at the Aston Martin Vanquish Zagato, two Volvo concepts, and the FCA Jeep airbag recall.

JL Jeep Wrangler experiencing death wobble, NHTSA checking into it

The redesigned 2018 JL Jeep Wrangler is selling remarkably well, but it looks like it's still susceptible to age-old Jeep solid front axle vehicle issues. Recently, the NHTSA has received 11 JL Wrangler-specific complaints for a problem referred to as "death wobble" in the Jeep community. It's currently looking into the complaints to see if further action is necessary. Death wobble is a term used predominantly by Jeep and specifically Wrangler owners to describe a violent steering wheel oscillation, typically caused by hitting some form of bump or pothole at higher speeds. For it to occur, there has to be something loose or damaged within the front steering or suspension system. The death wobble gets its name, because the vibrations through the steering wheel are far more frightening than any kind of a wheel imbalance problem. However, using the word "death" would be a misnomer as well, because there are no reported deaths due to the issue over decades of Jeeps experiencing the issue. A little over a month ago, FCA decided it needed to recall 18,000 JL Wranglers because of a faulty weld around where the track bar is welded to the frame. As of now, there's no evidence linking this faulty weld with death wobble (an FCA spokesperson told us as much), but one of the most common causes of death wobble is a track bar issue. If a bad track bar weld is your problem, you're in far worse shape than any death wobble, because you'll end up with a complete loss of steering. We asked Jeep about death wobble and a company spokesperson said that it "is not a widespread condition, nor is it a safety issue." FCA also said most of the incidents are linked to poorly installed suspension modifications, such as a lift-kit. However, the most current complaints for JL Wranglers describe unmodified and recently purchased vehicles. This means some vehicles still experience the issue despite being stock Wranglers. For now, if you experience the death wobble in your new Jeep, it's best to slow down immediately in a safe place. Most are taken by surprise by the sudden oscillations from the wheel, but you should still be able to control the car. FCA says that even if you do experience the issue, it is routinely corrected on its own. We'll keep tabs on this, and update if there are any developments. Related video: