1980 Jeep Cj 7 Renegade on 2040-cars

Auto blog

This SEMA special drag race is absurdly awesome

The SEMA Show came and went last month, and it showed us a ton of heavily modded goodies to dream about during the long, cold winter. The Motor Trend Channel on YouTube is keeping the party rolling a little longer, though, with a drag race inspired by the aftermarket event. All of the hosts were supposed to borrow a vehicle from the show for the big race, but only two of them actually cajoled companies into lending their wares. Still, the result includes four very cool and extremely different examples of the breadth of the automotive hobby. First up, there's a 1955 Chevrolet with a 535-cubic-inch (8.8-liter) Hemi V8 stuffed under the hood. Appropriately, it's dubbed the Blasphemi, and with skinny tires up front, fat rubber in the rear and a stripped interior, this this is made to go very fast in a straight line. Next, there's a stock Dodge Challenger SRT Hellcat boasting 707 horsepower. Plus, host Jessi Lang has her dog riding shotgun for the race. A Chevy Sonic RS with some body mods, downpipe and intake is also competing. Finally, the most bizarre of the quartet is a custom 1958 Jeep Forward Control with a 5.7-liter Hemi V8 and treads to replace the wheels. Obviously, the Blasphemi and Hellcat are the only two that really have a chance of winning, but check out the video to see which one crosses the finish line first. News Source: Motor Trend Channel via YouTube Aftermarket Chevrolet Dodge Jeep Truck Coupe Hatchback Off-Road Vehicles Racing Vehicles Performance drag race dodge challenger srt hellcat

Reveling in the reveals: BRZ, Civic, Wrangler, QX55

It’s almost like there should have been an auto show this week. If youÂ’re an enthusiast, you know the week before Thanksgiving is when the Los Angeles Auto Show kicks off. This year, thereÂ’s no L.A. show, at least until next May. But Subaru, Honda, Jeep and Infiniti rolled out significant new products this week, making us almost nostalgic for auto shows. Serendipity, or more likely previously allocated marketing budgets, gave us a familiar feel of new products, even though we couldnÂ’t feel or touch them under the bright lights of the Los Angeles Convention Center. LetÂ’s break them down: 2022 Subaru BRZ 2022 Subaru BRZ View 62 Photos Subaru stuck to basic formula here: The 2022 BRZ remains a rear-wheel drive sports coupe thatÂ’s supremely lightweight, adequately powered and attractive. Subaru debuts its new boxer four-cylinder in the BRZ. ItÂ’s rated at 223 hp and you need to rev all the way to 7,000 rpm to achieve that output. I'd prefer a bit more than the 184 lb-ft of torque the powerplant offers (reasonably low in the band at 3,700 rpm), for some more off-the-line grunt. Say 200 lb-ft, though itÂ’s almost a cliche to argue the BRZ is underpowered.  The outgoing BRZ is one of the purest cars IÂ’ve driven, so rather than harp on the power, which will ultimately be fine, give Subaru props for focusing on chassis improvements to improve rigidity by 60 percent and aid turn-in. Admirably, the curb weight is less than 2,900 pounds, and the manual in Premium trim checks in at the lowest, just 2,815 pounds.  Aesthetically, I like it. ItÂ’s busier than before, and thereÂ’s a lot more going on with the front fascia, wheel arches and fenders. ThereÂ’s a bit of a Porsche vibe up front, which is good, and a bit of a Honda Civic vibe in back (think 2010) thatÂ’s not.  ItÂ’s impressive that Subaru resisted the urge to gratuitously power up the BRZ and remained focused on the essence of its goodness and appeal to enthusiasts. 2021 Jeep Wrangler 392 2021 Jeep? Wrangler Rubicon 392 View 75 Photos What effect will the 2021 Ford Bronco have on the Jeep Wrangler? One school of thought is that it will actually make the Jeep better, and the 2021 Wrangler 392 is proof positive that will be the case. With the Bronco attracting spectacular levels of attention, Jeep could not sit idly by and remain focused on incremental changes. It needed to make a splash.

Jeep will build old Wranglers next to new ones in Toledo

Jeep made a lot of people happy when it confirmed that the next-generation Wrangler would continue to be built in Toledo, OH. Now, news is breaking about the lengths the automaker will go to in updating its northern Ohio factory. There's good news for Jeep dealers (more Wranglers to sell!), Jeep fans (more JKs to buy!), and Jeep itself (more money to be made!). According to a report from Automotive News, capacity at the factory will be increased to 350,000 units per year. That's around a 50 percent increase over what the Toledo complex can currently manage and is, according to Jeep boss Mike Manley, part of a move to keep production "at the right place" so "supply [stays] just behind demand." The other big news revealed by the AN report focuses on the future of the current Wrangler. Yes, the current JK has a future. It'll continue to be built at the Toledo factory up to six months after it successor arrives in showrooms, a move that's partially down to the way Jeep is shuffling production about. Toledo currently builds the Cherokee on a unibody production line – it'll continue to do so until March of 2017, when production will move to Belvidere, IL. The unibody line in Toledo will then be converted for body-on-frame production, which should take about six months. But during that time, the current JK (likely rebadged as a "Wrangler Classic") will continue to be built alongside another line of next-generation Wranglers, keeping dealers supplied with the today's Wrangler through March of 2018. The two Wranglers will overlap for about six months. This is all very good news if you've been waiting to pull the trigger on today's Wrangler. But move quickly – the clock is officially ticking. Related Video: News Source: Automotive News - sub. req.Image Credit: Bill Pugliano/Getty Images Plants/Manufacturing Chrysler Fiat Jeep FCA toledo Mike Manley