1978 Jeep Cj5 on 2040-cars

Auto blog

FCA recalls 894k total vehicles worldwide in two campaigns

FCA is recalling a total of 893,698 vehicles worldwide in two campaigns to fix problems with inadvertent airbag deployment, failure of the anti-lock brakes, and stability control systems in the Jeep Grand Cherokee, Liberty, Dodge Journey, and Fiat Freemont. 559,703 of these vehicles are in the US. The larger recall affects 284,089 examples of the 2003 Jeep Liberty and 2004 Jeep Grand Cherokee, and there are also 13,411 of them in Canada, 6,277 in Mexico, and 48,212 outside the NAFTA region. Because of "electrical noise beyond the tolerance of the airbag electronic control module", part of that component can fail, according to the National Highway Traffic Safety Administration. This can cause the front and side airbags to deploy and the seatbelt pre-tensioners to activate inadvertently. FCA US has seven reports of alleged injuries from this problem. To fix the situation, the Jeeps need their Occupant Restraint Control modules replaced, as well as the front- and side-impact sensors. According to the NHTSA, the replacement parts won't be available until early 2016. Still, FCA US will advise owners about the problem in a letter by the end of December and will send a second notification when the components are ready. The second campaign affects 275,614 examples of the 2012-2015 Dodge Journey in the US; plus 78,148 of them in Canada, 36,471 in Mexico, and 151,476 left-hand drive units outside of NAFTA where it's sold as the Fiat Freemont. On these vehicles, water intrusion can disable the anti-lock brakes and electronic stability control, although a warning light often illuminates when this issue occurs, and the problem doesn't affect regular braking. There are also no reports of injuries or accidents. To fix the issue, dealers will seal the ABS wiring harness and will replace any already affected components as necessary, like the ABS module or the headlamp and dashboard wiring harness. Statement: Occupant Restraint Control Modules October 30, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 284,089 older-model SUVs in the U.S. to replace their Occupant Restraint Control (ORC) modules and front and/or side-impact sensors, as required. Within this vehicle population, FCA US became aware of seven injuries caused by inadvertent air-bag deployments and advised NHTSA accordingly. The affected vehicles are not equipped with Takata Corp. air-bags. The Company is unaware of any related accidents.

2018 Jeep Wrangler will have an aluminum hood and doors, leaked memo says

Earlier this year, FCA CEO Sergio Marchionne revealed that 2018 Jeep Wrangler would feature a heavy dose of aluminum, though he didn't specify how. Now, JL Wrangler Forums says the Wrangler will use the material for the hood and the doors, citing an internal bulletin from aluminum supplier Alcoa. According to the forum, the company says the next-gen Wrangler will utilize Aloca's C6A1 (an internal name) high form alloy. The SUV will also get 6022 and A951 from Alcoa that will be used on the SUV's front and rear doors, as well as for the hood. Alcoa's C6A1 is the company's new high form alloy, while its 6022 alloy sheet can be found on things like a car's hood, door, or closure panels. Alcoa's A951 is the company's pre-treatment aluminum sheet bonding technology that it uses on automobiles. "A team in the Farmington Hills (Michigan, USA) Aerospace and Automotive Products group is leading a new profitable growth opportunity with the 2018 Jeep Wrangler program. The next generation Jeep becomes the first to utilize our C6A1 high form alloy; we are currently the only supplier of this high form product. Alcoa will also supply 6022 and A951, including front and rear door inners, hood outer and inner." As Marchionne pointed out earlier this year, the 2018 Wrangler won't be made entirely out of aluminum. So Alcoa's contribution to the upcoming SUV's doors and hood could be the only components that use the lightweight metal – or Jeep could be using another aluminum supplier for other parts. Large changes lie ahead for the 2018 Wrangler, which include a pickup version, new engines, and aluminum. But we do know that the next Wrangler is that it will be built in Toledo, OH, as FCA announced plans to spend $1.05 billion to retool the Wrangler factory, while also adding another site in Illinois earlier this year. Related Video:

Lexus tops JD Power Vehicle Dependability Study again, Buick bests Toyota

It shouldn't surprise anyone, but Lexus has once again taken the top spot in JD Power's Vehicle Dependability Study. That'd be the Japanese luxury brand's fourth straight year at the top of table. The big news, though, is the rise of Buick. General Motor's near-premium brand beat out Toyota to take second place, with 110 problems per 100 vehicles compared to Toyota's 111 problems. Lexus owners only reported 89 problems per 100 vehicles. Besides Buick's three-position jump, Scion enjoyed a major improvement, jumping 13 positions from 2014. Ram and Mitsubishi made big gains, as well, moving up 11 and 10 positions, respectively. In terms of individual segments, GM and Toyota both excelled, taking home seven segment awards each. The study wasn't good news for all involved, though. A number of popular automakers finished below the industry average of 147 problems per 100 vehicles, including Subaru, (157PP100), Volkswagen (165PP100), Ford/Hyundai (188PP100 each) and Mini (193PP100). The biggest losers (by a tremendous margin, we might add) were Land Rover and Fiat, recording 258 and 273 problems per 100 vehicles. The next closest brand was Jeep, with 197PP100. While the Vehicle Dependability Study uses the same measurement system as the Initial Quality Survey, the two metrics analyze very different things. The VDS looks at problems experienced by original owners of model year 2012 vehicles over the past 12 months, while the oft-quoted IQS focuses on problems in the first 90 days of new-vehicle ownership. Like the IQS, though, the VDS has a rather broad definition of what a problem is. Because of that, a low score from JD Power is no guarantee of extreme unreliability, so much as just poor design. In this most recent study, the two most reported problems focused on Bluetooth connectivity and the voice-command systems. The former leaves plenty of room for user error due to poor design (particularly true of the Bluetooth systems on the low-scoring Fords, Volkswagens and Subarus), while the second is something JD Power has already confirmed as being universally terrible. That makes means that while these studies are important, they shouldn't be taken as gospel when it comes to automotive reliability. News Source: JD PowerImage Credit: Copyright 2015 Jeremy Korzeniewski / AOL Buick Fiat Ford GM Hyundai Jeep Land Rover Lexus MINI Mitsubishi RAM Scion Subaru Toyota Volkswagen Auto Repair Ownership study