1956 Jeep Willys Cj-5 2.2l on 2040-cars

Auto blog

Jeep Wrangler pickup's rear suspension is inspired by Ram

Although we've learned about all there is to know about the new Jeep Wrangler, there is still more to discover about its upcoming truck sibling, such as the rear suspension. We knew it would be coil-sprung, but these new spy shots also indicate that the suspension is more similar to what's under a Ram 1500 than the Wrangler SUV. In the gallery above, the first two images compare the rear suspension of a new-generation 2018 Wrangler (left) and the Wrangler pickup (right). Immediately obvious is that the shocks on the Wrangler SUV are mounted at the back of the axle, while the truck's shocks are mounted at the front. It's also possible to see that the anti-roll bar on the SUV is mounted quite high up, while the truck's bar sits much lower, near the base of the rear axle. The third image shows a Ram 1500 on the left and the Wrangler pickup on the right. Here we can see that the Ram shares the same sort of low-mounted anti-roll bars and forward-mounted shocks, along with a Panhard rod. The two aren't quite the same, though. For one thing, the Wrangler pickup's rear axle looks more like the Wrangler SUV's than the one on the Ram. It's possible that these suspension changes were made in an effort to boost the Wrangler truck's payload capabilities. It's also possible that there are some handling quirks to the long truck body style for which a Ram-style suspension was better suited. We'll look forward to learning more about the differences when the truck is revealed, likely in early 2019. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Chrysler Recalls Jeep SUVs For Ignition Switches

The ignition switch defects that engulfed General Motors are now a rapidly growing problem at Chrysler. Chrysler said Tuesday it is recalling up to 792,300 older Jeep SUVs worldwide because the ignition switches could fall out of the "run" position, shutting off the engine and disabling air bags as well as power-assisted steering and braking. That's the same problem that has forced GM to recall more than 15 million cars over the last six months. Chrysler's recall covers 2005-2007 Grand Cherokees and 2006-2007 Commanders. The company said it is not sure exactly how many will be recalled, but said it will notify customers by mid-September. Chrysler said an outside force such as a driver's knee can knock switches out of the "run" position. Engineers are working on a fix. The Auburn Hills, Michigan-based automaker, now part of Fiat Chrysler Automobiles NV, said it knows of no related injuries and only one accident. But it said owners should keep clearance between their knees and keys until repairs are made. Chrysler has now recalled more than 1.7 million vehicles for ignition-switch problems. In June, the company added 696,000 minivans and SUVs to a 2011 recall to fix faulty ignition switches. Those recalls covered Dodge Journey SUVs and Chrysler Town & Country, Dodge Caravan and Volkswagen Routan minivans - which Chrysler made for the German automaker - from the 2007 to 2010 model years. Tuesday's recall is the outgrowth of two investigations opened by U.S. safety regulators last month as part of a broader probe into ignition-switch and air-bag problems across the auto industry. The agency wouldn't say Tuesday whether its investigation could lead to recalls at other automakers. The National Highway Traffic Safety Administration said in June that it was investigating Jeep Commanders and Grand Cherokees after getting 32 complaints that a driver's knee can hit the key fob or key chain, causing the ignition switch to move out of position. The federal investigation is still open. The agency said Tuesday that it is requesting additional information from Chrysler to ensure that its repairs will be effective. The investigations and recalls come after GM bungled an ignition-switch recall of older small cars. GM acknowledged that it knew of the ignition problem for more than a decade but failed to recall the cars until earlier this year, when it recalled 2.6 million small cars such as the Chevrolet Cobalt.

Jeep hiring 1,000 part-time workers in Toledo on Wrangler, Cherokee demand

The new Jeep Cherokee has been quite a success for Chrysler, but its factory workers are getting tired. The automaker has agreed to hire up to 1,000 part-time, temporary employees at its Toledo Assembly Complex where the CUV and Wrangler are built. It will allow the company to keep Jeep production moving, while giving laborers a break.
According to plant manager Chuck Padden in the Toledo Blade, full-time workers are regularly taking on 60 hours a week, and it's beginning to wear on them. "To get them more time off is important to us, to make sure they're refreshed, and can work safely," said Padden.
Chrysler has already hired 380 temporary, part-time workers for the plant, and 50 have been converted to full-time employees. The company is in the process of interviewing the rest of the new hires now and plans to have all 1,000 in place by the summer. They will work between 10 and 30 hours a week mostly on weekends for $15.78 per hour with limited benefits. The temporary positions will last "as long as demand continues for the Jeep Wrangler and the Jeep Cherokee," said Jodi Tinson, Chrysler spokesperson for manufacturing and labor communications, to Autoblog in an email.