1997 Jaguar Xk8 Base Convertible 2-door 4.0l on 2040-cars

Auto blog

Jaguar F-Pace leaps into crossover segment [UPDATE]

UPDATE: Jaguar has issued a statement indicating that the F-Pace cargo volume specified in the original official press release, was incorrect. In short, the correct figure is 33.5 cubic-feet, not 23 cu-ft, and we've updated the text. Here's the statement: "The previous draft of the release we issued incorrectly identified cargo volume in the Jaguar F-PACE using a figure that was not calculated using the US Market standard SAE methodology. The correct specification for rear load space volume in the 2017 Jaguar F-PACE with the second row seats up is 33.5 cu.ft., not 22.95 cu.ft." It's been two years since Jaguar showed off the C-X17 concept crossover at the Frankfurt Motor Show, giving us a deep metallic blue taste of what the world would look like with a leaping-cat in it. Here we have the production result, the 2017 F-Pace, coming to dealerships in Spring 2016. It will be offered in four trims - Premium, Prestige, R-Sport, and S - with three engines. Two supercharged V6 engines come at launch, one with 340 horsepower, the second with 380 hp, both shifting through the same ZF eight-speed transmission from the sedan range. Some time after that a 2.0-liter Ingenium diesel will join the lineup, offering 180 hp and 317 lb-ft. To get in, the price for that eventual diesel is will be $40,9907, while the V6s start at $42,390 and $56,700. If you liked the look of the C-X17 then there's nothing to put you off the F-Pace. The illuminated intakes from the concept are gone and the fender vents have a slightly different graphic, but otherwise you'll find Waldo before you'll find significant exterior changes. The body is one third aluminum, tweaked with high-strength steel, magnesium, and composites creating torsional stiffness numbers that match the new XF. Wheels go from 18 inches to 22 inches, hung at the ends of a double-wishbone setup in front, an integral link suspension in back, and monotube dampers all around, over a wheelbase that's 113 inches. Short overhangs front and back that mean a maximal approach angle of 25.5 degrees, a max departure angle of 25.7-degrees. The standard instrument binnacle is two analogue dials flanking a TFT display, the upgraded unit is a 12.3-inch virtual instrument cluster. It sounds like the interior trim will go as high up as you want it - something has to justify the $14,310 price difference between the V6 models - with "available leather" on the low end, aluminum mesh and satin grey ash at the other end.

2020 Jaguar I-Pace Suspension Deep Dive | All kinds of weird and wonderful

I’ve driven the Jaguar I-Pace a handful of times, and it always proves to be an enjoyable experience. In case youÂ’re not up to speed, this is JaguarÂ’s dual-motor all-wheel drive all-electric SUV. ItÂ’s quick, it looks cool in a running shoe sort of way, and it delivers a decent 234 miles of range. Sure, it has its faults, particularly when it comes to the infotainment and climate control layout. But the electric JagÂ’s smooth ride comfort and direct steering feel are clear strong points, and its handling stays nicely balanced and displays sharp reflexes as far as IÂ’ve pushed it. That is to say, a strong pace, but nothing that would land me in jail. The suspension plays a big role in all of this, of course. I wanted to see what theyÂ’d done, so I recently put an I-Pace HSE up on jackstands and took a look underneath. Electric powertrain notwithstanding, I found this to be an utterly weird and fascinating machine.    From this vantage it is easy to see the big air spring (yellow arrow). The use of this type of spring medium allows the I-Pace to run at different heights. It mostly runs at standard height, but can also lower the car at highway speeds to lessen aerodynamic drag. ThereÂ’s an even lower mode to ease the loading of passengers and cargo, along with a raised-height off-road mode because, well, this is theoretically an SUV. It looks like it has a double wishbone front suspension, too, with a high-mount upper arm (green). But we canÂ’t be sure until we move in closer.   With the wheel turned, we can see that this is a double wishbone front suspension in the sense that it has a single ball joint (green) at the bottom. ThereÂ’s lots of nice-looking forged and hollow-cast aluminum bits and pieces, too. But it looks odd in some other respects. The lower arm (yellow), for example, seems to have a joint of some kind in it. Meanwhile, near the top, you can see how the tall upright (or hub carrier, if you like) is curved (red) to provide tire and wheel clearance. Use the wheel studs as a reference point and you can imagine how the tire assembly will nestle into that area.   The shock absorber (green) runs up the middle of what is a doughnut-shaped air chamber. A very tall tower of a doughnut, but you get the idea. But you canÂ’t call this a coil-over. Do I hear bag-over? Anyway, a position sensor (yellow) is connected to the upper arm so the height-control system can regulate itself properly.

Junkyard Gem: 1995 Jaguar XJR

It's not too difficult to find discarded examples of the supercharged-V8-powered Jaguar XJR of the X308 generation, but the earlier X300-based XJR with its blown straight-six is a much more elusive Junkyard Gem. Here's one that just turned up in a Denver self-service knacker's yard. For many years, the Denver Pick Your Part was a funky, muddy operation on an industrial stretch of Federal Boulevard. I bought a lot of parts for various projects and documented dozens of discarded vehicles for this series there. On April first, LKQ moved that operation to a brand-new location a half-mile away and I showed up early to experience the grand opening. I'll miss the old Denver Pick Your Part, even with the treacherous footing, but sometimes even junkyards get junked. The new location is set in a vast asphalt parking lot, which should make it easier for shoppers to get around and extract parts. One of the employees drives this seriously cool Scion xB project, so that's a good sign. As I walked the rows, this two-tone Jag caught my attention immediately. What's going on here? The VIN says it's a genuine XJR, complete with supercharged 4.0-liter straight-six rated at 322 horsepower and 378 pound-feet. That beat the 313-horse V12 in the XJ12 that sat next to it in the showrooms. The supercharger is a member of the same Eaton family that was used in the Ford Thunderbird Super Coupe. This makes sense, because Ford had purchased Jaguar in 1989. The U.S.-market X306 XJR was available only with an automatic transmission; a few hundred with five-speed manuals were sold in Europe. The version we got here was good for 14.9-second quarter-mile times and ran 0-60 in 6.6 seconds— not bad for a car that scaled in at 4,215 pounds. The MSRP was a cool $65,000, or about $134,206 in 2024 dollars. The 1995 XJ12 listed at $77,250, which comes to $159,499 after inflation. This generation of XJR was sold here for just the 1995 through 1997 model years, after which it was replaced by the V8 XJR. Just 6,547 were built. This one received a heavy customization at some point, including big SUPERCHARGED badging. The bonnet is covered with faux carbon fiber, which was all the rage during the early Fast & Furious Era. The upholstery has been redone in well-executed two-tone embroidered leather. I knew there had to be some traces of this car online. Sure enough, Mecum auctioned it in Denver back in the summer of 2015.