Certified Adaptive Cruise Control 20 Inch Polished Wheels on 2040-cars

Auto blog

Jaguar will sell 10 fully restored Series 1 E-Types

The Jaguar Land Rover "Reborn" program is expanding its offerings yet again. The newest offering is the first from the Jaguar side of the company, and naturally the first car is a Series 1 E-Type. Jaguar Classic will restore 10 of the first-generation E-Types, and the cars will be sold directly to consumers from the company. The very first of the cars is the 1965 model you see above, which will make its public debut next week at the Techno-Classica Essen show in Germany. It's a 4.2-liter model finished in "Opalescent Gunmetal Grey." According to Jaguar, it was originally sent to California where it racked up 78,000 miles, and then was put into storage in 1983. Jaguar then acquired the car, and the Jaguar Classic department proceeded to restore it to factory specifications. Jaguar fixed and retained as many original parts as possible, and used replacement Jaguar Classic parts as needed. The car is fully numbers-matching with the original engine and transmission. If you're interested in purchasing this E-Type, or one of the other nine, you'd better have a hefty pocketbook. A standard restored car done to factory specs will start at about $355,000 at current exchange rates. If you want to spend more, Jaguar offers a few extra cost options such as an upgraded cooling system based on the one found in the Lightweight E-Type, a fully synchromesh transmission for early models without it, and upgraded front brake calipers from the later Series 2 E-Type. Related Video:

Jaguar testing hardcore F-Type R-S GT?

Some automakers make a hardcore model, then sit back and revel in its awesomeness. Jaguar does things a little differently. It takes a standard production model, gives it more power, bigger brakes and a tighter suspension and slaps the letter R on it. Then it gives it even more power, even bigger brakes and an even tighter suspension and calls it an R-S. Sometimes the engineers in Coventry don't even think that's enough, so they strip out some weight and dial things up even further and call it an R-S GT.
So far, they've only gone that far with the XK (transformed first into the XKR, then the XKR-S, and finally the XKR-S GT), but with that model on its way out, Jaguar seems to be preparing to give the newer F-Type a similar treatment. Now we can't be sure that what we're looking at is an F-Type R-S GT, especially since the 550-horsepower engine from the XKR-S and XFR-S is already powering the existing F-Type R Coupe, but it does seem to have all the makings of a hardcore performance model.
Compared to the existing F-Type, the development model pictured here has a bigger front splitter (like the one on the Project 7 concept), a big rear wing and a set of what looks like pretty big lightweight alloys. It's also, tellingly, a roadster, which (unlike the coupe) has until now topped out at 500hp with the V8 S model. So while it may be hard to say exactly just what Jaguar has in store for us here (or what they'll call it), one thing's for sure: it's gonna be fast and loud.

How Jaguar optimized the Ingenium gas engine for the F-Type

At the 2017 New York Auto Show, Jaguar showed off the new entry-level F-Type, packing a 2.0-liter, turbocharged, gasoline-fueled inline-four that produces 296 horsepower, which is built in-house in the UK. It's the debut of this branch of the Ingenium engine series, and it's also the top of the Ingenium gas range; most JLR vehicles will offer a less powerful 247-hp version. We caught up with Jaguar's engineers to figure out exactly how this high-output Ingenium engine differs, and what Jaguar had to do to fit it in the F-Type's engine bay. While all Ingenium 2.0-liter gas fours share major architecture – the aluminum block and heads, as well as the bore and stroke – there are some internal differences. The most important are the low-compression pistons, which allow for more boost without detonation. The new compression ratio is 9.5:1, compared to the 10.5:1 ratio in the 247-hp spec engines. To make the most out of more boost, you need new plumbing and a way to get more fuel into the combustion chamber. So Jaguar fitted a larger twin-scroll turbocharger that's unique to this application. It features low-friction ceramic ball bearings – Jaguar says this improves transient response. There are also new fuel injectors and a fuel pump to accommodate the increased demand for gas in the high-output engine. On the back end, there's a unique exhaust system with active flaps to give it a louder bark when called for. Of course, some new hardware and more boost means the various electronic systems that control the engine needed changes. For one, Jaguar's changed the cam timing and valve lift mapping, as well as the ignition timing. The throttle mapping and transmission calibration have also been optimized for the new engine. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. As far as the driver's concerned, the biggest change from the 247-hp engine to the 296-hp one – other than increased scoot – will be where the power peak is. The 296-hp engine makes peak power at a higher point in the rev range, which should reward drivers who generously prod the throttle and hold gears in manual mode. Remember, F-Types equipped with this engine will only be available with an automatic transmission. You should also remember that it's an excellent gearbox overall, with rapid, smooth shift characteristics, if the other 8-speed Jaguars are anything to go by.