63 Jag Roadster Series 1 Xke 6 Cyl High Compression Black Exterior Red Leather on 2040-cars

Auto blog

2016 Jaguar XF to hit 60 mph in 5 seconds, lead with cutting-edge infotainment

Since the second-gen XF's unveiling last week in an epic publicity stunt over London's Canary Wharf, the details on the new four-door have been rather scarce. That changes now, with the Jaguar revealing just about everything we could hope to know... aside from the price and fuel economy. As we covered in our original post, Jaguar has trimmed the weight for both rear- and all-wheel-drive variants by 132 pounds and 265 lbs, respectively. That means that, regardless of engine output, the two-wheel-drive model tips the scales at just 3,770 lbs, while the AWD XF slips in at 3,880. This was mainly done by way of aluminum construction – the 13th element constitutes 75 percent of the XF's structure – although ultra-high-strength steel also plays a role. Jag claims these elements not only reduce weight – which is almost perfectly distributed, with a "near" fifty-fifty ratio – but increases torsional rigidity by 28 percent. The new XF should be just as agile as the brand's namesake, thanks not only to the reduced weight and stiffer structure, but also to a new chain-driven all-wheel-drive system that's both lighter and more efficient than a traditional version. Impressive though that may be, the brand's Intelligent Driveline Dynamics system is the standout here. IDD manages the torque split, diverting power to the rear axle until it predicts, through factors like yaw rate, steering angle and lateral acceleration, when torque should be shifted to the front wheels. Moreover, the AWD system features Adaptive Surface Response, which takes the place of the old XF's winter driving mode. It monitors road conditions, modifying the behavior of the sedan's systems as needed. The second-gen sedan comes to the US in 340-horsepower and 380-hp variants – torque remains fixed at 332 pound-feet – courtesy of Jaguar Land Rover's familiar 3.0-liter, supercharged V6. The new XF's straight-line performance should be just as entertaining as it sounds, too. The rear-drive, 340-hp XF will hit 60 in 5.2 seconds, while the rest of the range can get there in 5.0. That marks a significant reduction compared to the first-gen V6 models, which used their 340 hp to sprint to 60 in a more leisurely 5.7 to 6.1 seconds. Regardless of output, the rear-drive XF will outrun both the BMW 535i and Mercedes-Benz E350 (we're still waiting on performance figures for the 329-hp E400, so Jag's RWD dominance may not last), which take 5.5 seconds and 6.5 seconds, respectively.

Who picks car colors and materials? Designers like Hannah Custance

As automotive journalists, we're often asked "how did you get that job?" People usually didn't even know you could do such a thing. In this 7 Questions series, we're highlighting other jobs in the automotive industry that you might not have heard about before. What do they do, how'd they get to do it and other questions about their particular corner of the car world. Slowly but surely, the automotive landscape is becoming more colorful. Look beyond the unrelentingly conservative palette of white, black and gray most buyers opt for and you'll see the increased use of exterior trim types beyond the usual chrome. There's gloss black, of course, but also other metallic finishes like gold or copper. Those can be found inside, too, where there's also an increase in colorful leathers and trims, innovative fabrics, new wood types and finishes, and greater creativity in general. So where is this change coming from? The answer is designers like Hannah Custance, the color and materials design manager for Jaguar Land Rover. Her team's latest effort is also its magnum opus, the 2022 Range Rover. Although saddled with the expectations that comes with one of the automotive industry's classic nameplates, the all-new Range Rover is also a celebration of cutting edge manufacturing and fashion-forward materials selection. We sat down with Hannah at the L.A. Auto Show to find out more about color and materials designers, how she ended up in the industry, and advice she might have for young designers out there. It has been condensed for brevity. Autoblog: What does a color and materials design manager to do?Hannah Custance: I basically look after a team of designers who design finishes for every A surface on the car. So, that could be exterior finishes. It could be interior trim materials, soft materials, hard materials, chromes, metals, woods, ceramic – that's one of the new ones – anything you can kind of touch and see is color material design. Autoblog: How early in the design process does your team become involved.Hannah: Right at the very start. In fact, we look at materials that don't have a product assigned to them or a car assigned to them. So, it takes actually a very long time for us to get materials approved and fully validated. We have to find suppliers that are willing to work in automotive and our test standards are incredibly high, some of the highest in the industry.

Jaguar F-Pace prototype goes to work at the Nurburgring

Jaguar is hard at work again, testing its upcoming F-Pace crossover. And here's our latest look at the prototype testing at the Nurburgring. The tester spotted here appears the same as the one we recently saw undergoing cold-weather development, only this time it's wearing summer rubber on fullsize wheels instead of winter tires on smaller ones. It's also missing the old prototype's auxiliary lights, and a bit more camouflage covering the quarter panels. The fact that it was seen on the Nordschleife, however, bodes well for the F-Pace and speaks to its orientation: Jaguar's first crossover promises to be geared towards performance, a sort of on-road counterpart to the off-road prowess of the SUVs offered by its sister brand Land Rover. We're looking forward to seeing the finished product at the Frankfurt Motor Show in the fall, but in the meantime you can scope out the spy shots in the slideshow above.