Dream Car For Dream Cruise! on 2040-cars

Auto blog

Jaguar C-X17 gets liquid metal finish for Dubai show [w/poll]

We thought the C-X17 concept looked pretty good when Jaguar unveiled it in Frankfurt a couple of months ago. But that shade of blue, while nice enough, made it look like it shared more than a similar name with the Mazda CX-7. No, what a Jaguar needs is a more luxurious paint job than electric blue. And that's just what the British automaker has given its crossover concept in time for the Dubai Motor Show this week.
What we have here is the same C-X17, but repainted in what Jaguar calls "a lustrous Liquid Aluminum liquid metal finish," and we have but to agree. What do you think? Scope it out in the fresh batch of high-res images above and cast your vote in the poll below.
View Poll

2016 Jaguar XF to hit 60 mph in 5 seconds, lead with cutting-edge infotainment

Since the second-gen XF's unveiling last week in an epic publicity stunt over London's Canary Wharf, the details on the new four-door have been rather scarce. That changes now, with the Jaguar revealing just about everything we could hope to know... aside from the price and fuel economy. As we covered in our original post, Jaguar has trimmed the weight for both rear- and all-wheel-drive variants by 132 pounds and 265 lbs, respectively. That means that, regardless of engine output, the two-wheel-drive model tips the scales at just 3,770 lbs, while the AWD XF slips in at 3,880. This was mainly done by way of aluminum construction – the 13th element constitutes 75 percent of the XF's structure – although ultra-high-strength steel also plays a role. Jag claims these elements not only reduce weight – which is almost perfectly distributed, with a "near" fifty-fifty ratio – but increases torsional rigidity by 28 percent. The new XF should be just as agile as the brand's namesake, thanks not only to the reduced weight and stiffer structure, but also to a new chain-driven all-wheel-drive system that's both lighter and more efficient than a traditional version. Impressive though that may be, the brand's Intelligent Driveline Dynamics system is the standout here. IDD manages the torque split, diverting power to the rear axle until it predicts, through factors like yaw rate, steering angle and lateral acceleration, when torque should be shifted to the front wheels. Moreover, the AWD system features Adaptive Surface Response, which takes the place of the old XF's winter driving mode. It monitors road conditions, modifying the behavior of the sedan's systems as needed. The second-gen sedan comes to the US in 340-horsepower and 380-hp variants – torque remains fixed at 332 pound-feet – courtesy of Jaguar Land Rover's familiar 3.0-liter, supercharged V6. The new XF's straight-line performance should be just as entertaining as it sounds, too. The rear-drive, 340-hp XF will hit 60 in 5.2 seconds, while the rest of the range can get there in 5.0. That marks a significant reduction compared to the first-gen V6 models, which used their 340 hp to sprint to 60 in a more leisurely 5.7 to 6.1 seconds. Regardless of output, the rear-drive XF will outrun both the BMW 535i and Mercedes-Benz E350 (we're still waiting on performance figures for the 329-hp E400, so Jag's RWD dominance may not last), which take 5.5 seconds and 6.5 seconds, respectively.

Jaguar's 600-hp XE SV Project 8 is the fastest Jaguar sedan ever

Jaguar is honing its XE SV Project 8 performance version, the car it calls its fastest four-door ever built. The manufacturer says the limited edition, 200mph sedan is almost production-ready, after countless small adjustments. The XE SV Project 8 will hit production in June. Only 300 of these 600-horsepower super sedans will be built, and they will all be handmade at Coventry's Special Vehicle Operations. Jaguar has also released this short documentary video clip about the project. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Project 8 Vehicle Dynamics Manager David Pook is enthusiastic about fettling with the car as long as it's possible. "The good thing about building only 300 cars, all handmade, is that you can keep developing the car right up to the start of production. And we've done just that." The recorded 0-60 mph time for the Project 8 is just 3.3 seconds, and it will go all the way to 200 mph. At the Nurburgring Nordschleife last year, it was able to set a four-door production car record time of 7 minutes and 21.23 seconds. There have been last-minute handling changes to make sure the car is just right, Pook says: "The springs have got stiffer and so have the engine mounts. The suspension arm bushes have changed. The brakes have been refined for the exact pedal feel and performance we want." Constant software modifications have also been made to alter the XE SV Project 8's responses. "It's certainly even faster, better handling and more responsive than it was six months ago. All that effort has been worth it." The car comes highly adjustable, as the ride height, camber, front splitter and rear wing setups can be altered. The stock tires are Michelin Pilot Sport Cup 2s on forged 20-inch wheels, and even the wheel bearings are ceramic! Front uprights, two-part upper wishbones, balljoints in place of rubber bushes, twin coil springs, dampers, lower suspension bushes, anti-roll bars and latest specification carbon ceramic brakes are all Project 8 specific, and the only bits lifted from the standard XE are the aluminum roof and front door skins. The vented bonnet and flared front wings and bumpers are carbon. One can also order the Project 8 with or without a rear seat, to save weight. Jaguar prices the Project 8 from GBP149,995 in the UK, or $210,000. Related Video: Featured Gallery Jaguar XE SV Project 8 Jaguar Special and Limited Editions Videos jaguar xe