2003 Jaguar X-type Base Sedan 4-door 3.0l on 2040-cars

Auto blog

Junkyard Gem: 2001 Jaguar XJ8

After Ford bought Jaguar in 1989, the bosses in Dearborn finally got their hands on a storied luxury brand that would be taken more seriously than Lincoln outside of North America. A fresh infusion of dollars worked wonders to improve the quality of Jaguar's engineering and assembly, and development of a modern DOHC V8 engine immediately took a high priority. That engine made its debut in the 1997 Jaguar XK8, then went into the engine compartment of the very first production Jaguar sedan to get factory V8 power: the XJ8. Today's Junkyard Gem is one of that first generation of XJ8, found crashed in a Colorado self-service boneyard. The 1998-2003 XJ8 lived on the final iteration of the mid-1980s-vintage XJ40 platform, the X308. While this means that the X308 had chassis ancestry stretching back to the British Leyland era, Ford's money ensured that it would be built better than its predecessors had been during the cash-strapped bad old days. Exterior styling wasn't much changed from that of the XJ300. Inside, the old XJ40 dash finally went away for good, replaced by a design more appropriate for the new century. Jaguar couldn't compete with BMW and Mercedes-Benz on leading-edge chassis engineering, but its heritage was hard to top. The engine is a 4.0-liter DOHC V8 with variable valve timing, rated at 290 horsepower and 290 pound-feet. Ford should get credit for funding Jaguar's own engine instead of simply stuffing some member of its Modular V8 family in here. If you wanted a manual transmission in your XJ8, the answer was a firm no. In fact, Ford ended up using the 3.9-liter version of this engine in the Ford Thunderbird and Lincoln LS. The MSRP for the base 2001 XJ8 was $56,355, or about $98,725 in 2024 dollars. The 2001 BMW 740i listed at $62,900 ($110,190 after inflation) and the 2001 Mercedes-Benz S 430 cost $70,800 ($124,030 now). Perhaps the $51,745 BMW 540i and the $56,050 Mercedes-Benz E 430 ($90,649 and $98,190 in today's money, respectively) were more realistic sales rivals for the XJ8, though. This car's interior is a bit grimy but appears to have been in nice enough condition when it arrived here. What happened? This happened. On a near-quarter-century-old European luxury sedan, body damage like this usually results in the insurance company declaring the car totaled. Remember when Dennis Tito paid $20 million to become the world's first space tourist? Jaguar could have saved him some money. You'll never, ever lose it in the parking lot.

Jaguar Classic's 3.8-liter engine block costs nearly as much as a new Jetta

Jaguar is helping collectors restore its vintage models by resuming production of the 3.8-liter six-cylinder engine block it built between 1958 and 1968. Called XK, the straight-six originally powered half a dozen models (including the famous E-Type), and its modern recreation costs nearly as much as a new compact sedan. Wearing part number C22250, the cast-iron block is built to the original's specifications by Jaguar's Classic division, and it comes with a 12-month warranty. Sourcing a used block would likely be markedly cheaper than ordering a new one from the factory, but enthusiasts who value originality above all will appreciate the fact that it comes certificate of authenticity. Customers who send the company proof of vehicle ownership can even retain the serial number from the engine they're pulling out, though an asterisk will identify it as a replacement. Jaguar built the XK engine for several decades, but the 3.8-liter variant only remained in production for 10 years. It powered cars like the surprisingly quick XK 150 roadster, the stately Mark IX and early examples of the E-Type, though its displacement grew to 4.2 liters in 1964. As of this writing, only the 3.8-liter XK is available new. If the E-Type you're painstakingly restoring deserves nothing less than the best, or if you think a 3.8-liter block makes an awesome coffee table, you'll need to send Jaguar a check for GBP14,340 including taxes, a sum that represents approximately $17,800 at the current conversion rate. Enthusiasts will also need to source pistons, connecting rods, a crankshaft and a complete cylinder head, among many other parts, so the cost of a full rebuild will lie well beyond the $20,000 threshold. For context, Volkswagen charges $18,895 for an entry-level Jetta. Related Video:

Jaguar Land Rover exploring 3D HUD and infotainment projections

With its most recent technology research, Jaguar Land Rover (JLR) is exploring the use of 3D projections for a world before and/or after autonomous vehicles come to fruition. In collaboration with the United Kingdom's University of Cambridge, JLR has developed concepts for a 3D head-up display that shows information on the road ahead and a system that projects personalized 3D infotainment for vehicle passengers.  As of right now, hundreds of production vehicles are equipped with two-dimensional head-up displays, some color, others black and white. Using various techniques and different technologies, manufacturers display information in a flat image in front of a driver. Some might find it distracting or unhelpful to have this in the driver's line of sight, and JLR might have found a solution. Rather than wedge the information in between the person and the view ahead, a 3D system that uses augmented reality could display the info onto the road in front of the driver. JLR thinks the system could project navigation directions, safety alerts such as lane departure, hazard detection or other bits typically found in a car's infotainment or instrument cluster. Some might find this to be even more distracting that 2D head-up displays, but to each his or her own. While the 3D head-up display is something that could be used right now, if it were released and passed legal, part two of JLR's 3D technology research is imagined for a life where truly autonomous vehicles are skating across the country. Using head- and eye-tracking technology, the system could lock into the position of numerous people in a vehicle and give each of them a personalized 3D projection "screen." This could be used to track a trip, look up points of interest, or even watch movies. JLR points out this could be used during ride-sharing without bothering others in the vehicle. The work with the Center for Advanced Photonics and Electronics at Cambridge is still in development for now, but it's only a matter of time before 3D tech makes it into cars in some degree.