Infiniti G35 2005 Automatic Sedan 85k Miles on 2040-cars

Auto blog

Infiniti's variable compression engine in the 2019 QX50 is the first of its kind

The world's first variable compression ratio engine is here, in a production car. That car is the 2019 Infiniti QX50, debuting this week at the Los Angeles Auto Show. The midsize crossover has seen a refresh that has brought it an all-new platform together with new driver assist features, but it's the engine that's the centerpiece here. Nearly everything is continuously variable under the hood of the QX50 – not only the new shift-by-wire XTRONIC CVT. The new VC-Turbo gasoline engine is able to change its compression ratio from 8:1 to 14:1, or anything in between depending of the driving situation; whether there is need for top-end power or turbodiesel-like torque from low revs, or optimized fuel economy. The pistons' reach is continuously adjusted by an electric "Harmonic Drive" motor, which controls a multi-link system, affecting the top-dead-center of the pistons and changing the compression. The engine can also switch between efficiency-maximizing Atkinson cycle and regular combustion cycle, on the go – and there's both multipoint injection and gasoline direct injection employed. The result is 268 horsepower at 5,600 rpm and 280 pound-feet of torque at 4,400 rpm; good figures for a 2.0-liter four-cylinder gasoline engine with a single-scroll turbocharger. Infiniti says that the FWD version's fuel economy of 27 miles per gallon combined is 35-percent better than the previous-generation V6 engine; in AWD guise, it reaches 26 mpg, which is a 30-percent improvement. The new engine is pretty much all-aluminum, but the vaguely magical-sounding "transformative multi-link components" behind the variable compression system are made from high-carbon steel alloy. The engine's multi-link system also enables it to do away with any balancing shafts, and Infiniti compares its smoothness to a V6 rather than a regular four-cylinder. In addition to the aforementioned tech, the VC-Turbo engine has the world's first active engine mount vibration damping system to smoothen its operation even further. Related Video:

Race Recap: 2013 Korean F1 Grand Prix crazy enough for Psy [spoilers]

The end of qualifying for the 2013 Korean Formula One Grand Prix left us with five pairs: two chassis each from Infiniti Red Bull Racing, Mercedes-AMG Petronas, Lotus, Ferrari and Sauber. Yes, Sauber. The last time the Swiss team had two drivers in the top ten was Japan last year, when Kamui Kobayashi converted the grid spot into a podium.
But let's start at the front of the top ten, where Sebastian Vettel put his Red Bull on pole for the 42nd time in his career. He was followed by Lewis Hamilton in second place by two-tenths of a second, Mark Webber in the second Infiniti Red Bull, and Romain Grosjean in the Lotus in fourth. Out-qualifying teammate Kimi Räikkönen again, the Finn would line up in tenth. Nico Rosberg put the second Mercedes in fifth, Fernando Alonso got the first Ferrari into sixth ahead of teammate Felipe Massa, while Nico Hülkenberg led with the first Sauber in eighth, teammate Esteban Gutiérrez showing the promise he was hired for (okay, and his money) in ninth. Except they'd all move up a place because Webber had to serve his ten-place grid penalty after getting his third reprimand of the season in Singapore. That would get Sergio Perez in his McLaren into tenth. Yes, McLaren needed a grid demotion ahead to make it into the top ten.
It was an entertaining top ten that no one would have expected. When the red lights went out, we were treated to one of the most entertaining races of the year - it was Gangnam Style at 300 kilometers per hour.

Infiniti offers chance to design Sebastian Vettel's helmet for the USGP

The Circuit of the Americas will host its second United States Grand Prix in November, and based on what's happening with New Jersey it might be the only US torch left alight in the Formula One firmament. The story even before the inaugural event was about getting American fans involved, and Infiniti appears to be making the first splash this year with a competition to design Sebastian Vettel's helmet for the first two days of race weekend.
The only thing required of the graphic designer within you is to head to the competition site, download the helmet template and slather it in your unique technicolor vision. It will require some thought to make something interesting, though, since much of the helmet is already committed to team and sponsor logos; other than a few thin strips along the sides, your creativity will be confined to the oval atop the shell. Vettel will choose the winner and will wear the selected lid during the free practices and qualifying.
The grand prize winner will also get a VIP trip for two to the grand prix as a guest of Infiniti, which includes some face time with the triple world champion himself. The contest is on now, the deadline for entries is 11:59 pm GMT (6:59 EST), Sunday, September 29th and the winner is chosen the very next day. There's a press release below with more info if you want the complete skinny before putting stylus to digital paper.