2010 Infiniti G37x Awd 30k Navigation Camera Bose Sunroof Heated Leather Loaded on 2040-cars

Auto blog

Infiniti delays fastback-like QX55 crossover until late 2020

Infiniti confirmed it has delayed QX55 production by about five months. The as-yet-unveiled crossover is a swoopier, more stylish evolution of the QX50 with a fastback-like roof line inspired by some of the company's past models. The Nissan-owned company informed its suppliers production will start in November 2020, not in June as previously announced. It explained it needs to "ensure production capability" at the Aguascalientes, Mexico, facility that will manufacture the model. It didn't provide additional details, though a spokesperson confirmed the new timeline to Automotive News. The factory — a joint-venture between Mercedes-Benz parent company Daimler and Nissan — also makes the QX50, the A-Class, the Kicks, and the Sentra, among other models. "Production schedules are internal and due to various operation priorities can move — sometimes forward, sometimes backward — as a normal course of business," a spokesperson told Autoblog.  The QX55 is based on the aforementioned QX50, and spy shots confirm the two models share several design cues when viewed from the front. Minor nameplate-specific details will set the 55 apart from the 50. It's a different story out back, where the 55 ditches the 50's family-friendly silhouette for a fast-sloping roofline penned with an eye on the first-generation FX released for the 2003 model year, five years before the original BMW X6.  Infiniti is not yet revealing technical specifications, but we expect the variable-compression VC-Turbo engine will be one of the available powertrains. The turbocharged, 2.0-liter unit makes 268 horsepower and 280 pound-feet of torque in the QX50. It also returns 26 mpg in combined driving, according to the EPA. What remains to be seen is whether the delay also affects the car's unveiling date, which hasn't been publicly announced yet. An Infiniti spokesperson told Autoblog the QX55 is scheduled to make its debut "in the next few months," and pointed out it's one of five new models due out in the next three years. When it does arrive, the Infiniti QX55 will compete in the same segment as the BMW X4 and the Mercedes-Benz GLC Coupe.

Infiniti's variable compression engine in the 2019 QX50 is the first of its kind

The world's first variable compression ratio engine is here, in a production car. That car is the 2019 Infiniti QX50, debuting this week at the Los Angeles Auto Show. The midsize crossover has seen a refresh that has brought it an all-new platform together with new driver assist features, but it's the engine that's the centerpiece here. Nearly everything is continuously variable under the hood of the QX50 – not only the new shift-by-wire XTRONIC CVT. The new VC-Turbo gasoline engine is able to change its compression ratio from 8:1 to 14:1, or anything in between depending of the driving situation; whether there is need for top-end power or turbodiesel-like torque from low revs, or optimized fuel economy. The pistons' reach is continuously adjusted by an electric "Harmonic Drive" motor, which controls a multi-link system, affecting the top-dead-center of the pistons and changing the compression. The engine can also switch between efficiency-maximizing Atkinson cycle and regular combustion cycle, on the go – and there's both multipoint injection and gasoline direct injection employed. The result is 268 horsepower at 5,600 rpm and 280 pound-feet of torque at 4,400 rpm; good figures for a 2.0-liter four-cylinder gasoline engine with a single-scroll turbocharger. Infiniti says that the FWD version's fuel economy of 27 miles per gallon combined is 35-percent better than the previous-generation V6 engine; in AWD guise, it reaches 26 mpg, which is a 30-percent improvement. The new engine is pretty much all-aluminum, but the vaguely magical-sounding "transformative multi-link components" behind the variable compression system are made from high-carbon steel alloy. The engine's multi-link system also enables it to do away with any balancing shafts, and Infiniti compares its smoothness to a V6 rather than a regular four-cylinder. In addition to the aforementioned tech, the VC-Turbo engine has the world's first active engine mount vibration damping system to smoothen its operation even further. Related Video:

Infiniti JX35 QX60 Hybrid confirmed for New York debut

The next Q-ified Infiniti will be making its debut at the New York Auto Show later this month, the QX60 - the crossover formerly known as JX35. And while there aren't many changes to the crossover in terms of design or function, the big news is that Infiniti will be revealing a production hybrid powertrain option for its seven-passenger luxury/utility vehicle.
The QX60 Hybrid uses the same powetrain found in Infiniti's M35h gasoline-electric sedan, which couples a 2.5-liter supercharged four-cylinder engine with a 15-kilowatt electric motor, running to the wheels via continuously variable transmission. Both front- and all-wheel-drive versions of the QX60 Hybrid will be available, and Infiniti says that the more efficient CUV should be good for around 26 miles per gallon combined - an improvement of five mpg over the current JX35 with its 3.5-liter naturally aspirated V6. And because the compact lithium-ion battery will be housed underneath the third row seat, we're told that the hybrid model will still have the same passenger and cargo capacity of the non-hybrid crossover.
This will be the first three-row hybrid CUV offered in the US market, and wrapping it up in a luxury package makes a lot of sense to us, since it could be a good way of cajoling customers into absorbing the extra cost of the more expensive powertrain. (Keyword in that sentence: CUV. After all, the Cadillac Escalade is still currently available as a two-mode hybrid for the 2013 model year.) Infiniti has not released official pricing figures, but says that the hybrid model will represent a roughly $3,000 premium over the standard QX60.