2004 Infiniti Fx35 on 2040-cars

Auto blog

Infiniti extends long-wheelbase Q50 L for the Chinese market

Want to sell your luxury sedan in China? You're going to need a long-wheelbase model. Not because the still-dominant Chinese government mandates it, or because the customers are taller, but because Chinese buyers tend to like being chauffeured around in the back of their luxury sedans instead of driving themselves, so the priority is on rear-seat space over driving dynamics.
We've seen the likes of Audi, BMW, Cadillac, Mercedes-Benz and Volvo all roll out long-wheelbase versions of their compact and midsize sedans specifically to cater to Chinese tastes. Even Infiniti - which now bases itself in Hong Kong - offers a long-wheelbase Q70 L not only in China but around the world, and has now bolstered its extended offerings with the reveal of the Q50 L, set to debut at the Chengdu Motor Show later this month.
Set to be produced locally for the local market, the Q50 L adds nearly two inches to the wheelbase of the Q50 to the benefit of rear-seat legroom. Power comes from Infiniti's 2.0-liter turbo four offering 208 horsepower and 236 pound-feet of torque, driving to the rear wheels through a seven-speed automatic transmission with drive-by-wire steering.

Nissan recalls 640k crossovers for wiring issue, hood release

The National Highway Traffic Safety Administration has announced two separate recalls affecting hundreds of thousands of Nissan crossovers. The larger of the two involves the electrical system in 2008-2013 model year Rogue CUVs. In affected vehicles, a mixture of moisture and salt seeping in through the carpet on the driver's side could cause the harness connector to short, potentially causing a fire. The issue involves Nissan Rogues manufactured between March 7, 2007, and November 26, 2013, as well as examples of the 2014 Rogue Select manufactured between September 23, 2013, and July 2, 2014. All told, that comes to an estimated 468,815 units in the United States alone. The second recall affects the relatively smaller quantity of 170,665 vehicles, made up of 2013-14 Nissan Pathfinder, 2014 Pathfinder Hybrid, 2013 Infiniti JX35, 2014 QX60 and 2014 QX60 Hybrid models. (The JX35 was recently relabeled as the QX60 under Infiniti's new nomenclature.) The issue affecting some of those vehicles revolves around a hood release cable that may not properly latch. Nissan is notifying owners of the affected units to bring their vehicles in to have the wiring checked and to replace the harness connector and seal in the former case, and to have the hood release mechanism modified in the latter. All told, an estimated 639,480 vehicles are being recalled as part of the two campaigns. RECALL Subject : Electrical Short Due to Water Seepage Report Receipt Date: JAN 26, 2015 NHTSA Campaign Number: 15V032000 Component(s): ELECTRICAL SYSTEM Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008-2013 Nissan Rogue vehicles manufactured March 7, 2007, to November 26, 2013, and 2014 Nissan Rogue Select vehicles manufactured September 23, 2013, to July 2, 2014. The affected vehicles may experience an electrical short in the harness connector due to a mixture of snow/water and salt seeping through the carpet on the driver side floor near the harness connector. CONSEQUENCE: An electrical short can cause a vehicle fire. REMEDY: Nissan will notify owners, and dealers will inspect the kick panel wiring harness connector and will if necessary install a new harness connector and waterproof seal, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Nissan customer service at 1-800-647-7261.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.