2008 M45 4.5l V8 32v Automatic Rwd Sedan Premium on 2040-cars

Auto blog

Nissan sets 2017 sales record with help from Rogue, Titan, and Armada

Nissan Group said its U.S. sales climbed 1.9 percent in 2017 to an all-time record of more than 1.59 million vehicles sold. Free pizza in the conference rooms in Nashville, right? But a closer look shows the company mirroring overall industry trends, with plenty of declining-popularity cars but also a few aging trucks and SUVs. Taken together, Nissan's trucks, SUVs and crossovers saved the day, selling an all-time high of 765,624 total units, up 15 percent from 2016. That offset a 10.9-percent drop in sales of Nissan's cars, as volume sellers like the Altima and Versa posted steep drops. Also buoying overall results was the Infiniti division, which gained 10 percent from the previous year on the strength of models like the Q60 and QX30. Nissan's record year owes a lot to the Rogue, its compact crossover, which set an annual sales record with 403,465 vehicles, an increase of 22.3 percent. Sales of the Titan, Nissan's full-size pickup, grew an impressive 141.9 percent to 52,924 units, while the Armada, a full-size three-row SUV that was all-new for 2017, also saw a huge jump in sales (154.1 percent) to 35,667. Infiniti, meanwhile, saw overall sales climb 10.9 percent on the strength of huge gains by the Q60 Coupe, which rose 170.8 percent, and the QX30 crossover, which grew almost 524 percent. That being said, Infiniti volume is relatively low. The Q60 Coupe sold a total of 40,444 units and the QX30 14,093 for 2017, while Nissan shifted 40,172 Rogues in December alone. On the car side, the Maxima did well, gaining 7.9 percent to finish at 67,627. Volume-wise, the Sentra dominated, nudging up 1.7 percent to 218,451. But the rest of the lineup mirrored industry trends for the car segment, with steep drops for the Altima (down 17 percent), battery-electric Leaf (-19.8 percent), Versa (-19.2 percent) and Juke (-48.1 percent). Several truck, crossover and SUV models are also not faring so well. The aging Frontier pickup, last updated in 2005, fell 14.5 percent, the Pathfinder slipped by 0.8 percent, the Quest minivan plummeted 55.5 percent and the upscale Murano crossover fell by 11.8 percent. A Nissan spokesman says the Quest is no longer being built for the U.S. market starting with the 2018 model year. Meanwhile, reinforcements are coming. Nissan has said it's planning a new generation of the Frontier, its entry-level pickup, but hasn't clarified when.

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.

Nissan recalls Rogue, Pathfinder, Infiniti QX60 for seat issue

Nissan and Infiniti are recalling their 2023 Rogue, Pathfinder and QX60 SUVs and CUVs to address a potential defect in their seat frame welds that can allow the frames to fail in the event of a collision. The number of vehicles that potentially shipped with weak welds is rather small — just over 12,000 — but the issue could nonetheless lead to injury if a failure occurs during a collision.  "The driverÂ’s powered seat may not be fully secured to the seat frame on certain Nissan Rogue, Pathfinder, and INFINTI QX60 vehicles," Nissan's report to NHTSA said. "As a result of this issue, the seat frame welds may detach from the rear inboard seat bracket. If this condition occurs, it may increase the risk of injury to the occupant in the event of a crash. In addition, the seat frame assembly may not meet certain FMVSS 207 and FMVSS 210 requirements because of this condition," Nissan said.  Nissan says there's no easy way for customers to detect the issue ahead of time, and that its seats need to be inspected by a service tech to see whether it is properly secured. Dealers will be instructed to check the driverÂ’s seat rail clearance to the inboard seat bracket, and if necessary, the dealer will remove and replace the affected driverÂ’s seat cushion frame, NIssan said. The entire procedure should take less than two hours.  Owners of affected vehicles should look for notices to be delivered no later than June.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Recalls Infiniti Nissan Crossover SUV Luxury