2007 Infiniti M45 Sport Sunroof Nav Rear Cam Xenons 36k Texas Direct Auto on 2040-cars

Auto blog

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.

Nissan, Infiniti issue recall for replacement Takata air bags in older models

Nissan and Infiniti are recalling older vehicles that were repaired after collision damage to address problems with Takata replacement air bag inflators that were potentially installed. The overall campaign population is difficult for Nissan to pin down because the only vehicles impacted would be those that Nissan and Infiniti know to have been serviced with the replacement units in question. Officially, the recalled population numbers just 375, but Nissan says more than 18,000 cars could have the defective parts installed.  Drivers of 2001-2003 Nissan Maximas, 2002-2006 Nissan Sentras, 2007-2012 Nissan Versa Sedans/Hatchbacks, 2002-2003 Infiniti QX4s and 2006-2010 Infiniti M35s/M45s that had their vehicles repaired after a collision or theft should be aware that these deadly replacement parts may have been used.  "The potentially affected inflators may have been installed on vehicles after final remedy repair completion under the vehicle recalls as part of a subsequent theft or collision repair," Nissan's notice said. "Vehicles that received the subject parts prior to December 9, 2016, are not affected as they would have been subsequently included in the final remedy recalls and replaced with a final remedy driver and/or passenger air bag inflator. Nissan has identified 18,422 vehicles that may have had these parts installed during service." The air bag inflators in question were inadvertently shipped to service inventory between December 9, 2016 and November 12, 2021 — after the dangers of Takata's inflator design were known to the industry. Notices are already being mailed; owners will be asked to bring their cars in for inspection, and if defective parts are found, they will be replaced.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Infiniti delays fastback-like QX55 crossover until late 2020

Infiniti confirmed it has delayed QX55 production by about five months. The as-yet-unveiled crossover is a swoopier, more stylish evolution of the QX50 with a fastback-like roof line inspired by some of the company's past models. The Nissan-owned company informed its suppliers production will start in November 2020, not in June as previously announced. It explained it needs to "ensure production capability" at the Aguascalientes, Mexico, facility that will manufacture the model. It didn't provide additional details, though a spokesperson confirmed the new timeline to Automotive News. The factory — a joint-venture between Mercedes-Benz parent company Daimler and Nissan — also makes the QX50, the A-Class, the Kicks, and the Sentra, among other models. "Production schedules are internal and due to various operation priorities can move — sometimes forward, sometimes backward — as a normal course of business," a spokesperson told Autoblog.  The QX55 is based on the aforementioned QX50, and spy shots confirm the two models share several design cues when viewed from the front. Minor nameplate-specific details will set the 55 apart from the 50. It's a different story out back, where the 55 ditches the 50's family-friendly silhouette for a fast-sloping roofline penned with an eye on the first-generation FX released for the 2003 model year, five years before the original BMW X6.  Infiniti is not yet revealing technical specifications, but we expect the variable-compression VC-Turbo engine will be one of the available powertrains. The turbocharged, 2.0-liter unit makes 268 horsepower and 280 pound-feet of torque in the QX50. It also returns 26 mpg in combined driving, according to the EPA. What remains to be seen is whether the delay also affects the car's unveiling date, which hasn't been publicly announced yet. An Infiniti spokesperson told Autoblog the QX55 is scheduled to make its debut "in the next few months," and pointed out it's one of five new models due out in the next three years. When it does arrive, the Infiniti QX55 will compete in the same segment as the BMW X4 and the Mercedes-Benz GLC Coupe.