2000 Infiniti I30 on 2040-cars

Auto blog

Infiniti delays fastback-like QX55 crossover until late 2020

Infiniti confirmed it has delayed QX55 production by about five months. The as-yet-unveiled crossover is a swoopier, more stylish evolution of the QX50 with a fastback-like roof line inspired by some of the company's past models. The Nissan-owned company informed its suppliers production will start in November 2020, not in June as previously announced. It explained it needs to "ensure production capability" at the Aguascalientes, Mexico, facility that will manufacture the model. It didn't provide additional details, though a spokesperson confirmed the new timeline to Automotive News. The factory — a joint-venture between Mercedes-Benz parent company Daimler and Nissan — also makes the QX50, the A-Class, the Kicks, and the Sentra, among other models. "Production schedules are internal and due to various operation priorities can move — sometimes forward, sometimes backward — as a normal course of business," a spokesperson told Autoblog.  The QX55 is based on the aforementioned QX50, and spy shots confirm the two models share several design cues when viewed from the front. Minor nameplate-specific details will set the 55 apart from the 50. It's a different story out back, where the 55 ditches the 50's family-friendly silhouette for a fast-sloping roofline penned with an eye on the first-generation FX released for the 2003 model year, five years before the original BMW X6.  Infiniti is not yet revealing technical specifications, but we expect the variable-compression VC-Turbo engine will be one of the available powertrains. The turbocharged, 2.0-liter unit makes 268 horsepower and 280 pound-feet of torque in the QX50. It also returns 26 mpg in combined driving, according to the EPA. What remains to be seen is whether the delay also affects the car's unveiling date, which hasn't been publicly announced yet. An Infiniti spokesperson told Autoblog the QX55 is scheduled to make its debut "in the next few months," and pointed out it's one of five new models due out in the next three years. When it does arrive, the Infiniti QX55 will compete in the same segment as the BMW X4 and the Mercedes-Benz GLC Coupe.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Grand Prix of the Americas, Day 1 Recap: a city arose in the fields, and it was good

The Circuit of the Americas is the miracle in the fields, the track that no one thought would be finished in time to hold its appointed race. But the Texans got past the turmoil, and even though the heavy machinery was still working on dirt roads as July, come November 18 there was a beautiful, and completed, Formula 1 facility for Travis County to call its own. It was dusty, sure. But it was done, and F1 could come to town.
Infiniti, sponsors of Red Bull Racing, invited Autoblog to watch the first grand prix in America since 2007, and the first GP on a dedicated F1 course since the Phoenix street circuit in 1991. Here's a little recap of what we saw and fount out on day one.