2013 Infiniti G37s Cabriolet on 2040-cars

Auto blog

Nissan recalls 640k crossovers for wiring issue, hood release

The National Highway Traffic Safety Administration has announced two separate recalls affecting hundreds of thousands of Nissan crossovers. The larger of the two involves the electrical system in 2008-2013 model year Rogue CUVs. In affected vehicles, a mixture of moisture and salt seeping in through the carpet on the driver's side could cause the harness connector to short, potentially causing a fire. The issue involves Nissan Rogues manufactured between March 7, 2007, and November 26, 2013, as well as examples of the 2014 Rogue Select manufactured between September 23, 2013, and July 2, 2014. All told, that comes to an estimated 468,815 units in the United States alone. The second recall affects the relatively smaller quantity of 170,665 vehicles, made up of 2013-14 Nissan Pathfinder, 2014 Pathfinder Hybrid, 2013 Infiniti JX35, 2014 QX60 and 2014 QX60 Hybrid models. (The JX35 was recently relabeled as the QX60 under Infiniti's new nomenclature.) The issue affecting some of those vehicles revolves around a hood release cable that may not properly latch. Nissan is notifying owners of the affected units to bring their vehicles in to have the wiring checked and to replace the harness connector and seal in the former case, and to have the hood release mechanism modified in the latter. All told, an estimated 639,480 vehicles are being recalled as part of the two campaigns. RECALL Subject : Electrical Short Due to Water Seepage Report Receipt Date: JAN 26, 2015 NHTSA Campaign Number: 15V032000 Component(s): ELECTRICAL SYSTEM Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008-2013 Nissan Rogue vehicles manufactured March 7, 2007, to November 26, 2013, and 2014 Nissan Rogue Select vehicles manufactured September 23, 2013, to July 2, 2014. The affected vehicles may experience an electrical short in the harness connector due to a mixture of snow/water and salt seeping through the carpet on the driver side floor near the harness connector. CONSEQUENCE: An electrical short can cause a vehicle fire. REMEDY: Nissan will notify owners, and dealers will inspect the kick panel wiring harness connector and will if necessary install a new harness connector and waterproof seal, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Nissan customer service at 1-800-647-7261.

US-built Infiniti Q50 engines to go into Euro-only cars

Back in March, Infiniti announced that it would be adding a 2.0-liter, turbocharged four-cylinder to its Q50 line for European and Chinese buyers. Now, we know where that engine will be built.
Nissan's Decherd, TN facility will receive the $319-million investment, which will see a separate, dedicated line for the Infiniti engines. According to Automotive News, this is more than a line running alongside the Nissan operations - the Infiniti facility will sport its own unique architecture and interior lighting, in a bid to distinguish the premium line from its mass-market parent company.
The logistics of all this do seem, on the surface, quite screwy. Building a new engine on one continent for a car built on another that will eventually go on sale on a third doesn't seem too bright, although there is a catch here. The new engine will also find its way into the Mercedes-Benz C-Class, which will kick off production in Vance, AL later this year.

4 ways Infiniti’s Q Inspiration concept bridges present and future

Infiniti's new Q Inspiration concept is a striking fastback sedan that the company says reflects an inflection point for both the luxury brand and the broader auto industry itself. It represents a bridge between technologies. That's true in the literal sense; it employs Infiniti's new variable compression turbocharged engine technology, which provides performance features while maximizing efficiency, and bridges the gap to more advanced powertrains. It also features Nissan's ProPilot semi-autonomous driving technology. But it's also true for the concept car's design, which Infiniti says provides a simple, elegant solution to complex technological questions — offering a palate cleanser, if you will, for the complicated technologies hidden beneath the gleaming surfaces. Oddly enough, the futuristic-looking Q Inspiration owes a debt of gratitude to the Prototype 9, the concept based on a 1940s-style grand prix car that Infiniti released last year. Alfonso Albaisa, Infiniti's senior vice president for global design, said that project became "a kind of a blank canvas for us to play with" and allowed for new discovery and expression with minimal brush strokes. It also led designers back to Ma, the Japanese concept of mastery of empty space. We spoke with Albaisa about how the concept's design echoes the theme of bridging the present and future. 1. The cabin's forward proportion and roominess Using the space-efficient VC-Turbo engine gave the designers space to shift the cabin forward and move the A-pillars back, creating a more centered and elongated cabin, with maximum headroom. The interior is clean, with orange and black leather with orange accents and backlit birch wood accents. The center console is floating, providing seamless connectivity to technology and hiding mechanical elements. Albaisa says it's the first manifestation of Infiniti's new form language for an era of advanced powertrain and future technologies. 2. The grille In what Albaisa describes as "a little bit of an accident" and "kind of tongue-in-cheek," the Q Inspiration's grille is a kind of trompe l'oeuil phenomenon. From directly in front, you can see the small fins, but viewed from the side, they disappear. So much so that Albaisa said he was initially fooled. "From a functional point of view, we need to breathe," he said. "But I think in the future, where there'll be a lot different types of technology, probably the car can breathe less. So we don't need that dominating big open mouth.