2008 Infiniti G35x S Gray Fully Loaded Sport on 2040-cars

Auto blog

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

Infiniti takes to Facebook to explain model names, mentions 550-hp flagship

Infiniti caused quite a stir this week when it announced that it would be changing its vehicle names so that all of its cars start with Q and all of its crossovers and SUVs start with QX. Many displeased fans and owners took to social media to voice their opinions, and Johan de Nysschen, the new Infiniti boss, responded today with a Facebook post of his own.
In the note, de Nysschen talks about the challenge of product expansions with alphanumeric names that allow for flexibility without encroaching on the trademarked names of other automakers, although we're sure de Nysschen's former colleagues at Audi aren't looking forward to a Q30 or Q50. He also says that as Infiniti grows to become a global brand, the new naming structure - which closely mimics Volvo - is also designed to reduce confusion (just don't tell that to current owners). One thing that de Nysschen assured wouldn't happen is a confusing "X" added to the end of all-wheel-drive model names that would result in names like the Q60X or, even worse, the QX50X.
While we are not looking forward to relearning Infiniti's product lineup, de Nysschen has given us something to look forward to courtesy of a new performance sedan. From the brief explanation of this car, which was used as a key example in explaining the validity of the new names, we learned that the new model will be a performance version of what is now the M sedan, and it will be powered by a "charged induction" 3.0-liter V6 producing more than 550 horsepower. The M's name will become the Q70, but as of right now, it isn't clear if this will be an IPL model or something else.

A look inside Infiniti's variable-compression engine

We're sympathetic to anyone who had trouble understanding what's going on with Infiniti's new variable-compression engine. While we got a full tech briefing on the novel VC-Turbo back in August, the visual aids were lacking. The cutaway engine Infiniti brought to the Paris show fixes all of that. You can thank the little green and pink lines on the cutaway for making the whole idea a little more clear. Click through the gallery to see two lines – one green and one pink – that represent the different strokes allowing for different compression ratios. Remember, the compression ratio is the amount of volume in the cylinder on intake compared to the amount at the end of the compression stroke. Leave more room at the end and you lower that ratio. The length of the stroke doesn't change with this system, but where it sits along the cylinder does. Hence those two lines. The variable compression ratio allows this new turbocharged engine to maximize fuel economy when the turbo isn't needed by raising the compression ratio. It will see its first use in the next Infiniti QX50 crossover, previewed by the QX Sport Inspiration concept that's also on display in Paris, and has performance targets of 268 horsepower and 288 pound-feet of torque. After, it will migrate to other Infiniti and Nissan vehicles, with transverse front-drive-based applications first in line. Eventually, it's likely to completely replace Nissan's corporate 3.5-liter V6. We'll be poking around the engine a little more in Paris today to try and get some more info. For now, enjoy those cutaway images and those friendly little lines. Featured Gallery Infiniti VC-Turbo engine cutaway View 14 Photos Paris Motor Show Infiniti Nissan Technology Emerging Technologies engine 2016 paris motor show