2003 Infiniti G35 Sedan W/leather on 2040-cars

Auto blog

Infiniti QX55 Luggage Test | The price to be paid for a coupe

The Infiniti QX55 is the crossover-coupe version of the QX50, which like other such variants available throughout the industry, chops the roofline and cargo area down to create a "coupe-like" appearance. Obviously, this results in a reduction in cargo capacity, but because that reduction is largely above the back seat line, the actual reduction in usable cargo space isn't as great as you might expect. While carrying a large box or some other tall, bulky thing will be more difficult, smaller items like suitcases won't necessarily be much different since carrying them above the back seat line can reduce or eliminate rear visibility and create a hazard by flying forward while stopping as well. It's for those very reasons I don't stack to the roof in luggage tests. Now, I have not tested the QX50, so I have no point of comparison in that regard. But I have tested a variety of crossover-coupes and the QX55 does indeed share common attributes ... and detriments.  On paper, the Infiniti QX55 has 26.9 cubic-feet of cargo space behind its back seat. That is basically the same as the Audi e-Tron Sportback and a bit less than the Mustang Mach-E and Toyota Venza. The Cayenne Coupe figure just seems inaccurate.  The QX55's back seat reclines, however, so its amount is variable. I do not know where Infiniti set it while doing it's measurement, but I set it for a comfortable degree comparable to most fixed back seats. You can also easily lower the back seat with handles in the cargo area. Both elements are pictured below.  Now, let's get to the bags. As in every luggage test I do, I use two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). I also include my wife's fancy overnight bag just to spruce things up a bit (21L x 12W x 12D). Cool, that was easy. All the bags easily fit with minimal Tetrising and ... Oh no. Wait, they don't. Despite all the bags seeming to be clear of the liftgate, the power-closing function got stuck repeatedly. I could slam it shut manually, but that's another no-no here at Luggage Test Portland in order to keep things consistent.  I then Tetrised and Tetrised and Tetrised again. No good, no good, no good. "Boy, what an annoying cargo area," I said to an empty street. This is what eventually worked after the sixth attempt.

Infiniti QX50 concept previews production model with variable compression engine

Infiniti revealed its QX50 concept ahead of its official debut at the Detroit Auto Show, and despite the concept title, it looks pretty much production-ready. The company calls the crossover "an evolution of the QX Sport Inspiration" concept, and that's certainly accurate. Side-by-side, the QX Sport, which we already figured was previewing a new QX50, and this concept look nearly identical. The primary changes are bumpers and side skirts that feature the obligatory aluminum trim to look like skid plates, and simple black plastic fender flares. The overall result is a crossover that is pleasant but not exactly exciting that bridges the gap between the small and swoopy QX30 and the large QX60. The plain wrapper hides plenty of impressive technology, though. Under the hood is Infiniti's fascinating variable-compression turbocharged engine. It's a 2.0-liter inline-four that can alter its compression ratio to anything between 8:1 and 14:1. The result is an engine that produces an estimated 268 horsepower and 288 lb-ft of torque. Infiniti says the four-cylinder should be about 27-percent more efficient than a comparable V6. In addition, while the company says this concept just shows a potential application of the engine, it's safe to say that you can expect it in the production model. With the new engine, the QX50 will also switch from to a front-drive platform, with all-wheel drive definitely an option or possibly standard; the current QX50 is based on the aging rear-drive FM platform used on other Infinitis and the Nissan 370Z. The other new tech buried in the QX50 concept's body is what Infiniti calls the "first production-ready incarnation" of its ProPilot semi-autonomous technology. The company doesn't go into great detail about what it will do except for handling stop-and-go highway traffic. We would hazard a guess that the system is functionally the same as the one introduced on the Nissan Serena minivan in Japan. It goes by the same name and can handle stop-and-go traffic, as well as maintain the car's lane position and distance behind other cars. It's another safe bet that we'll see this system in the production model. Other details about the car, such as the interior, have yet to be revealed. We're sure to see it as well as other information about the QX50's technology when it makes its full debut in Detroit. Related Video:

Infiniti previews its own Vision Gran Turismo

Every automaker and its parent company is lining up to design its own set of wheels for the GT6 as part of the Vision Gran Turismo program, and this latest one comes from Infiniti. Although nothing in the way of details were disclosed at this point, the two teaser images released today show that, like most of its compatriots, Infiniti's design is for a low-slung, track-focused, two-door sports car. Its long bonnet suggests a front-engined layout, with an intriguingly ovoid windshield framed by raised buttress A-pillars and Infiniti's signature dog-leg rear pillars. The aerodynamic profiling looks suitably advanced for a mythical beast like this one, with deep extractor vents cut into the hood, intersecting side sills running from the front brake vents, an enormous rear diffuser and an even bigger rear wing. More than that we couldn't tell you at this point, but we're sure video racers will enjoy driving this super-Datsun as much as the Nissan Concept 2020 Vision Gran Turismo released back in June.