12 Limited Navi Panoramic Roof Heated Leather Bluetooth Infinity Rear Camera Aux on 2040-cars

Auto blog

Genesis G70 to reportedly get Sonata N-Line turbo engine

The Genesis G70 is still relatively new, but that doesn’t mean Genesis isn't going to tinker with it. This report from Car and Driver claims that the new 2.5-liter turbocharged four-cylinder going in the Hyundai Sonata N-Line will also be making its way into the G70Â’s engine bay. Hyundai estimates this engine will produce 290 horsepower and 310 pound-feet of torque in the Sonata. ThatÂ’s a significant improvement over the 2.0-liter turbocharged four-cylinder used as the base engine in the G70 today, which makes 252 hp and 260 lb-ft. Doing the math, the G70 could be getting a boost of about 38 horsepower and 50 pound-feet of torque. Increased power from the turbo four would make the 3.3-liter, twin-turbo V6 less of an upgrade at 365 hp and 376 lb-ft, unless Genesis squeezes out more power. We wouldn't complain about that. The news does casts doubt on the future of a manual transmission option. Genesis offers the manual in only one trim of the G70 now, and thatÂ’s paired with the 2.0-liter turbo four-cylinder. Take that engine away, and we can only hope that Genesis feels itÂ’s necessary to mate up a manual with the new 2.5-liter turbo. As of now, the Sonata N-Line is the only Hyundai announced to use this engine, and itÂ’s being paired with an eight-speed dual-clutch automatic in that application. Car and Driver says the manual take rate on the G70 so far is only 4 percent, which isnÂ’t a promising statistic. The most obvious time for this powertrain news would be paired to a mid-cycle refresh of the G70. As itÂ’s still a relatively new car, we donÂ’t expect to see that until 2021 or 2022. We'll let you know if any of this conjecture becomes reality.

First Hyundai N car coming to US in 2018, and we think we know what it is

SEOUL, South Korea - At the worldwide debut for the all-new Hyundai Kona compact crossover in South Korea, a group of journalists was given a sneak peek at Hyundai's new N performance car division. The group, led by Albert Biermann, has been tasked with giving Hyundai a performance image beyond the occasional car like the Genesis coupe or Veloster Turbo. Its first project, the i30 N, is nearly complete. Unfortunately, it's not coming to the US, though we will be getting our very own N car sometime next year. Now, Biermann and Hyundai will not say what that car is, but all signs point to the Veloster. Hyundai won't comment on future products, but we saw at least three distinct versions of the Veloster testing at Namyang during our visit. There was a standard model with center-mounted trapezoidal exhaust tips. There was a turbo-badged model with two round center-mounted exhaust tips. Finally, we saw what is surely the N model. This had a hidden N badge in the grille (in the same place as the i30 Ns that we saw) and exhaust tips that were pushed to the corners of the bumper. We weren't allowed to take photos of anything, but the new Veloster has the same basic asymmetric shape as before, as seen in some spy photos. The interior looks to be similar to the i30, with a floating infotainment display and a clean and simple layout. Unfortunately, most of the exterior was still covered in camouflage. Despite the parade of cars, there was nothing on the exterior that we haven't seen in spy photos. Other details are scarce, but look for the turbo model to retain the 1.6-liter turbocharged inline four, good for at least 200 horsepower. That should give the N model plenty of breathing room. We believe it will get the same engine as the i30 N, meaning a 2.0-liter turbocharged inline-four making at least 250 horsepower, possibly more. While we didn't get a chance to drive the i30 N, the cars made all the right noises when blasting about. According to Biermann, it was the sound of tuned Hondas and Kias blasting about Hyundai's R&D facility that really kicked things off with N. Engineers were buying other cars since there wasn't much on offer. Hyundai wanted to give people cars they could track and tune and be just as fast as the competition. We have high hopes for both the Veloster N and the N division as a whole. Biermann was formerly the vice president of engineering for BMW's M division and was in charge of the development of the M3, M4, and M6.

Hyundai Sonata sales drop so Santa Fe production will increase

Hyundai will begin production of the five-seat Santa Fe Sport at its Alabama factory this summer to take advantage of the growing popularity of crossovers in comparison to midsize sedans. The company won't release official production targets for the CUV at the plant, but an anonymous company insider told Reuters Hyundai would build around 30,000 of them at the site this year. The Kia factory in Georgia will continue to handle the majority of Santa Fe Sport production, but the Alabama assembly will help Hyundai keep up with demand. The three-row Santa Fe will still come from South Korea. The Alabama factory has a 400,000-unit annual capacity and already produces the Elantra and Sonata. Sonata sales slipped in 2015 to 213,303 deliveries from 216,936 in 2014. Meanwhile, the volume of both body styles of Santa Fe jumped to 118,134 examples in 2015 from 107,906 the previous year. According to Reuters, Hyundai could have sold more of the CUVs last year, but a limited production capacity restricted the sales. Rumors from 2015 suggested that Hyundai might have had an eye on the plant for additional crossover production in case of falling sales for the sedans built there. The Alabama factory last built the Santa Fe in August 2010. "We're thrilled to bring back another pillar of the Hyundai lineup to our production mix here at HMMA," Chris Susock, vice president of production at the plant, said in the announcement. SANTA FE SPORT PRODUCTION WILL BEGIN AT HYUNDAI MOTOR MANUFACTURING ALABAMA IN SUMMER 2016 ID: 44810 • Additional production will support growing demand in the sport utility segment • Alabama plant is the home of the Sonata and Elantra sedans • Plant is capable of assembling 400,000 units per year MONTGOMERY, Ala., January 7, 2016 –Hyundai Motor Company has announced the addition of the Santa Fe Sport to the production schedule at Hyundai Motor Manufacturing Alabama (HMMA) starting in the summer of 2016. This change will supplement existing U.S. production of the sport utility vehicle to meet the growing demand in this popular vehicle segment. "We're very happy Hyundai has been able to make this change, which will result in more great Santa Fe crossovers available to our dealers and customers," said Dave Zuchowski, president and 'CEO of Hyundai Motor America. "The new production will help us meet the growing demand for one of our most popular products," said Zuchowski.