2010 Hyundai Elantra Gls Automatic Spoiler Alloys 42k Texas Direct Auto on 2040-cars

Auto blog

We check out Hyundai's HRL exoskeleton, a robotic mobility suit for paraplegics

Hyundai makes some of the largest vehicles in the world – to wit, 185,000-ton ships with 56-foot high engines making power at 84 rpm – but its R&D division has found enough human-factor synergy with autonomous vehicle development that they're now working on robotic exoskeletons. We were recently introduced to two of these devices: the HRL designed to increase mobility and therefore quality of life for paraplegics; and the WEX, designed to assist in repetitive-motion lifting. Both of these machines are powered by replaceable lithium-ion battery packs with a 4-hour run time and 40-minute recharges. The HRL robotic legs are designed for people 64 to 71 inches tall and less than 250 pounds. The aluminum segments are adjustable in centimeter increments over a 10-cm range, and the 22.4-inch width means it would fit in many long-haul aircraft forward seats. With the 4.4-lb battery pack, the HRL weighs about 41 pounds. There are six 50:1 reduction-gear actuators, two pelvic actuators rated at 224 pound-feet of peak torque with 60-degree range of motion, and two hip and knee with 112 lb-ft peak, 180 degrees and twice the rotational speed of the pelvic motors. Twenty sensors control it all with default speed of just under a mile per hour and a top speed of 1.5 mph, and step length can be adjusted by smartphone via Bluetooth. One of the accompanying crutches has four thumb buttons much like a video-game controller, though they're experimenting with simpler inputs including a joystick. The crutch communicates with the leg unit over a few feet of distance via Zigbee wireless protocol, with security layers added for both obvious reasons and to ensure two users in the same vicinity won't transmit to the other's unit. An HRL can help you sit, stand, walk or climb and descend stairs; it will also stand on its own, simplifying the process of putting it on. Your correspondent is outside the design height limits so rather than do any impromptu CG research we deferred to colleague Chris Davies of Slashgear for impressions wearing it: "It grips tightly, the support would be comforting, and it delivers good posture. It does take some getting used to – when it first lifts up a leg to move it forward you do feel like you're going to fall over – but once you establish a gait and stop over-thinking it becomes much easier." Indeed, he never fell over and most who tried established a rhythm within a few minutes, if not a 1.5-mph sprint.

Kia Sedona and Hyundai Tucson recalled for hood latches

The Basics: Hyundai and is Kia division have issued two recall notices, both for similar issues. The larger of the two affects 219,800 units of the 2006-2014 Kia Sedona minivan built between June 15, 2005, and April 04, 2014. The second relates to 81,000 examples of the 2016 Tucson crossover manufactured from May 19, 2015, to March 14, 2016. The Problem: In both cases, the secondary hood latch may not properly secure the hood in place and keep it from opening while under way. Injuries/Deaths: None reported. The fix: Dealers will replace the secondary hood latch, or in the Sedona's case, maybe just clean and lubricate the latch, as needed. Both campaigns are set to begin next month. If you own one: Make sure you don't accidentally release the primary hood latch while driving or the secondary latch may not do its job. Related Video: RECALL Subject : Secondary Hood Latch may Bind and not Latch Report Receipt Date: JUN 01, 2016 NHTSA Campaign Number: 16V389000 Component(s): LATCHES/LOCKS/LINKAGES Potential Number of Units Affected: 219,800 Manufacturer: Kia Motors America SUMMARY: Kia Motors Corporation (Kia) is recalling certain model year 2006-2014 Kia Sedona vehicles manufactured from June 15, 2005, through April 04, 2014. In the affected vehicles, the secondary hood latch may bind and remain in the unlatched position when the hood is closed. CONSEQUENCE: If the primary latch is inadvertently released and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash. REMEDY: Kia will notify owners and dealers will replace the secondary hood latch or clean and lubricate the latch, depending on the vehicle's location and the condition of the latch. These repairs will be performed free of charge. The recall is expected to begin on July 25, 2016. Owners may contact Kia at 1-800-333-4542. Kia's recall number is SC134. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ## RECALL Subject : Secondary Hood Latch may Disengage Report Receipt Date: MAY 24, 2016 NHTSA Campaign Number: 16V348000 Component(s): LATCHES/LOCKS/LINKAGES Potential Number of Units Affected: 81,000 Manufacturer: Hyundai Motor America SUMMARY: Hyundai Motor Company (Hyundai) is recalling certain model year 2016 Tucson vehicles manufactured May 19, 2015 to March 14, 2016.

Kia, Hyundai testing big crossovers, and one looks like the Telluride

Big things are coming from Hyundai and Kia in the near future, and we mean literally. One of our spy photographers caught the companies each testing full-size crossover SUVs out in the snow. The Kia caught our attention in particular, because it looks quite a bit like the Kia Telluride concept from 2016. At the front of the Kia, the entire fascia looks boxy with nary a curve in sight. It also has low-set, squared-off headlights at the far edges; both prominent features on the concept, too. That theme carries over to the back, where the metal portion of the hatch looks plain and flat and is almost perfectly vertical. The glass area leans forward a bit. The taillights also look like those on the concept, with thin vertical portions that make a 90-degree turn inward at the top. A neat design touch not found on the concept are the slight glass extensions into the roof on each side of the windshield. When the concept Telluride was revealed, it was based on the Sorento platform and had a combined 400 horsepower. This power came from a 270-horsepower V6 and a 130-horsepower electric motor, which Kia claimed would provide 30 mpg in all-wheel-drive form. We expect that the Telluride will mainly be offered in non-hybrid forms, and perhaps in diesel form, since this prototype was testing alongside a Volvo XC90 diesel. But we also wouldn't necessarily rule out a hybrid variant like the concept. Kia and Hyundai both are getting serious about hybrids and electrification, and if Kia is targeting something like the XC90, which itself offers a hybrid powertrain, it would make sense that Kia is planning to offer a competing product. A Kia executive said news about the production model is coming "soon," so we'll probably learn more about the production Telluride sometime this year, probably no earlier than the New York Auto Show. View 16 Photos As for the big Hyundai, it will likely take the space the newly downsized Santa Fe has vacated. We're not sure what it might be called, but the last time Hyundai had a crossover bigger than the Santa Fe, it was called the Veracruz, so the name could make a return. Styling-wise, the front of this full-size crossover is right in line with the rest of Hyundai's new-generation crossovers. It has the split headlight design that first showed up on the Kona, with the lower lamps providing primary illumination, and the thin, scowling upper lamps working mainly as daytime running lights.