2007 Hummer H3 on 2040-cars

Auto blog

Watch the 2022 GMC Hummer EV launch using its Watts to Freedom mode

It’s nearly the July Fourth weekend, and GM is celebrating Independence Day a little earlier than most. The celebration comes in the form of a GMC Hummer EV demonstrating Watts to Freedom, or WTF, mode for us on video. You can watch it at the top of this post, but the idea is rather simple. ItÂ’s just a video of a Hummer development vehicle accelerating as quickly as it can from 0-60 mph and beyond. GMC claims its 1,000-horsepower electric Hummer is capable of hitting the 0-60 mph mark in “approximately 3 seconds,” which is borderline terrifying for how large of a vehicle it is. The super-quick time is possible when using the Watts to Freedom launch control mode, which “channels the propulsion systemÂ’s tremendous power into acceleration bursts.” The truck will still be plenty fast when accelerating normally, but WTF mode is what you should use to unlock its full potential. GMCÂ’s video shows us the graphics it uses in the digital cluster to signal Watts to Freedom is activated, and the whole sequence looks like it leans on U.S. military themes for both design and phrasing. For example, GMC lets you know that Watts to Freedom is ready via an “Armed” message in the cluster.  The 2022 GMC HUMMER EV is a first-of-its kind supertruck develop View 40 Photos Instead of a rumbling exhaust and screeching tires, the Hummer appears to silently launch with all four tires grabbing on and catapulting the truck away. It looks quick as it throws all of the weight rearward into an accelerative squat. And in case you missed it, thatÂ’s a lot of weight — GMC says itÂ’ll tip the scale at 9,046 pounds. GMC has previously said that production will begin in late 2021, and this video continues to confirm that timeframe with a note saying “initial availability Fall 2021.” Do keep in mind that only the sold-out Launch Edition is coming at that time. Other cheaper variants will follow in the years to come. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. GMC Hummer EV reveal

Robby Gordon withdraws from 2016 Dakar after stupid accident

Accidents are bound to happen in motorsports, and for that very reason, modern racing vehicles are built to a very high standard of safety. Unfortunately, the accident that caused Robby Gordon to withdraw from the 2016 Dakar Rally involved a road-going Hummer H2 driven by members of the American racing driver's support staff – a vehicle without racing harnesses or roll cages. As the video above shows, this is one accident that was completely avoidable. According to news reports flowing out of Argentina, Gordon had already finished the 13th and final stage of Dakar and was driving his HST Gordini competition truck on a highway headed to the podium where all the back-patting, trophy presentations, and champagne sprays typically happen. Along the way, someone from Gordon's crew decides to pass some bottles and paper bags, window-to-window, from a support vehicle to Gordon's race machine. At about 80 miles per hour. Does that sound like a bad idea to anyone else? And a bad idea it ultimately was. Gordon swerved one too many times to get closer to his support car, coming into contact with it and causing what looks to be a pretty bad accident. Making matters worse, a member of Gordon's team was hanging halfway out of an open window with bottles in hand at the time of the accident. Reports indicate there were two injuries. Thankfully, everyone will apparently recover. It's not clear where exactly Gordon would have finished had he not withdrawn. It is clear, however, that this was a stupid maneuver that never should have happened. For those keeping track, this latest incident isn't the first time Robby Gordon has been involved in an off-road rally accident, having injured a spectator in the 2015 Baja 500. According to Autoblog.com.ar (no relation), Gordon's Dakar accident is under investigation. News Source: Autoblog.com.ar, YouTube Motorsports Hummer Safety Racing Vehicles Videos Dakar Rally robby gordon

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.