2001 Honda S2000 on 2040-cars

Auto blog

Takata airbags were adopted in late 1990s to save a few dollars per vehicle

According to a new report from The New York Times, General Motors started using airbags supplied by Takata in the late 1990s as a cost-saving measure even after receiving warnings about their safety. Takata's airbag modules were reportedly 30-percent cheaper than its competitors' offerings. GM approached Autoliv, which until that time had been its main airbag supplier, to see if it could offer a competitively priced alternative to Takata. Autoliv tested Takata's airbag inflator and found that it was unsafe, according to scientists who worked for the supplier at the time. Chris Hock, who until recently still worked for Autoliv, said the inflator "turned it into shrapnel" when tested. GM was subsequently warned by Autoliv that Takata's ammonium nitrate inflators were potentially dangerous. Still, "General Motors told us they were going to buy Takata's inflaters unless we could make a cheaper one," said Linda Rink, who served as a senior scientist at Autoliv at the time. A spokesperson for General Motors told The Times that it would be inappropriate to comment on discussions that "occurred two decades ago between Old GM and a supplier." So far, no Takata-supplied airbags have ruptured in an accident, and GM was far from the only automaker to make a switch to Takata airbags in order to save money. A total of 64 million airbags have so far been recalled from nearly every automaker selling vehicles in America. A spokesperson from Honda said in a statement to The Times that "There was no industry understanding in the late 1990s" that ammonium nitrate airbag inflators were risky. The majority of deaths linked to Takata airbags were in vehicles built by Honda. Takata still produces airbag inflators that use an ammonium nitrate compound, despite the devices being blamed for at least 14 deaths. Click here for NHTSA's dedicated site on open Takata recalls. Related Video: News Source: The New York TimesImage Credit: Joe Skipper / Reuters Government/Legal Recalls GM Honda Safety autoliv

Acura replaces chief Accavitti with designer Ikeda

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.

2019 Subaru Forester vs. 2020 Honda CR-V Car Seat Test

We've had our long-term 2019 Subaru Forester Touring for some time now, and I've had my large son's car seat in it — and out of it, and back in it — a fair number of times. Installing a car seat over and over is a pain, but the Forester is actually a pretty good car for it. The rear seat is roomy, the door opening is large and the car seat is generally easy to install. For a few short days, though, I also had a 2020 Honda CR-V Hybrid in the driveway alongside the Subaru. Mostly stuck at home in quarantine, I wasn't getting a lot of chances to drive the two cars back to back, but comparing something like a child's car seat in each car is easy enough without unnecessary trips and potential exposure to coronavirus. So, with my son along for moral support, I lugged his car seat out of the garage and got to strappin'.  In terms of backseat roominess, the Forester and CR-V are competitive. On paper, they're very close, with the Forester offering 39.4 inches of rear legroom and 39.6 inches of headroom, and the CR-V providing 40.4 inches of legroom and 39.2 inches of headroom (the fact that I tested a Hybrid makes no difference). For each, I moved the front passenger seat forward to a reasonably comfortable seating position, keeping a sizeable gap between my knees and the dashboards, and eyed them up. They look damn near the same, each offering lots more space in the second row than my wife's 2013 Mercedes-Benz GLK that I'm usually putting the car seat into. Even the openings are close in size and shape, perhaps with the Forester getting a slight advantage in ingress/egress for one's feet, which matters little when installing the boy's Chair Force One (officially a Britax Frontier ClickTight). First, I tried the car seat in the Subaru. It's really easy. There's no angling the seat to wedge it in the door. Just walk up and plop it down. I thought for sure the Forester would take the win here, but when I went to put it in the CR-V, it was equally simple. Once installed, both still offer plenty of room behind the front seat for a child to swing their legs around without kicking the seat back. With just one child, we often find ourselves putting one of the rear seats down to accommodate more items, like when we're hauling gear up to our cottage for a vacation — or just going to Costco. If we're picking a side of the car, we usually put our boy on the passenger side.