2000 Honda S2000 Base Convertible 2-door 2.0l on 2040-cars

Auto blog

McLaren working on P15 supercar to slot between 650S and P1

McLaren has been busy these past few years. It launched the MP4-12C in 2011, the 12C Spider in 2012, the P1 in 2013 and (most recently) the 650S in 2014. But it's not about to stop there. It's got an "entry-level" model in the works, set to take on the Porsche 911, and - according to information reported by Car and Driver and confirmed by McLaren in correspondence with Autoblog - a new flagship model, too.
The project is internally codenamed P15, and it calls for a new flagship that will cap the company's lineup once the P1 finishes its limited production run, but carry a price tag in the neighborhood of $500k to slot in between the P1 and the new 650S.
Just how, you wonder, can McLaren possibly develop another supercar each year? Simple: underneath, they're all essentially the same. (Only we're sure it's anything but simple.) That is to say they're all based on the same carbon monocoque structure and powered by the same 3.8-liter twin-turbo V8 mated to a seven-speed dual-clutch transmission driving the rear wheels. What differentiates them is what the engineers in Woking build around that monocoque and how they tune the engine: +/- 600 horsepower in the 12C (depending on the year it was built), 640 hp in the 650S, or 727 hp in the P1 (with another 177 from the electric assist). The 911 fighter would likely develop in the 500hp range, and the P15 will probably land in the upper 600 (or lower 700) range.

Submit your questions for Autoblog Podcast #319 LIVE!

We record Autoblog Podcast #319 tonight, and you can drop us your questions and comments regarding the rest of the week's news via our Q&A module below. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #319
Jeep checks out the Grand Wagoneer at Wagonmaster

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.