2020 Honda Ridgeline Black Edition on 2040-cars

Auto blog

Texas teen is 10th Takata airbag victim

A 17-year-old high school senior from Richmond, Texas, died in a 2002 Honda Civic on March 31 after the Takata-supplied airbag inflator ruptured. This is the 10th fatality linked to the faulty parts in the US. Honda and US regulators confirmed that the airbag exploded, according to Reuters. The fatal incident occurred when the Civic's driver rear-ended a Honda CR-V. The teen was wearing a seatbelt and wasn't speeding. "Everybody should have walked away from this," Fort Bend County Sheriff's Deputy Danny Beckwith told Reuters. However, a piece of shrapnel from the inflator cut the driver's carotid artery, and the person died. With this latest fatality, there have been 10 deaths and over 100 injuries in the US from exploding airbag inflators. Nine of the deaths have happened in Honda vehicles. The other was in a Ford Ranger pickup. Investigators at the Independent Testing Coalition placed the cause of the explosions on a combination of the inflator's chemical, design, and the weather. The ammonium nitrate propellant can explode with additional force when exposed to moisture, like in high humidity areas. The part's construction is also part of the problem because it allows this humidity to access the chemical. Takata has recalled roughly 24 million airbags in 19 million vehicles in the US. The latest tally from the National Highway Traffic Safety Administration showed that as of March 11, 2016, about 7.5 million inflators have been replaced. All the parts with ammonium nitrate inflators may need replacing someday, which could affect 100 million vehicles. Related Video: Statement from Honda Concerning Confirmed Texas Rupture Statement from American Honda Motor Co., Inc. Re: Confirmed Rupture of Takata Airbag Inflator in Fort Bend County, Texas Statement date: April 6, 2016 During an inspection today, accompanied by representatives of the National Highway Traffic Safety Administration (NHTSA), the Sherriff's Department of Fort Bend County, Texas, and Takata, American Honda confirmed that the Takata driver's airbag inflator ruptured in the crash of a 2002 Honda Civic on March 31, 2016, in Fort Bend County, Texas, resulting in the tragic death of the driver. Our thoughts and deepest sympathies are with the family of the driver during this difficult time. Honda has shared all available vehicle history information collected to date with NHTSA and will continue to cooperate with NHTSA throughout the process of investigating this crash.

Is the Acura Legend coming back?

Great news for fans of the Acura Legend: Honda has applied for a trademark in Europe for the word "Legend," pertaining to "Vehicles; Apparatus for locomotion by land; Apparatus for locomotion by air; Apparatus for locomotion by water; Parts and fittings for land vehicles; Parts and fittings for air and space vehicles; Parts and fittings for water vehicles." This trademark was first spotted by AutoGuide.com, and gives more credence to our speculation from a couple months ago about the possibility of the Legend nameplate returning to the Acura lineup in the States. If you were reading closely before, you'll notice that it was actually Honda that applied for the trademark, not Acura. The Legend was sold with a Honda badge on it in Europe back in the day, so this trademark filing in Europe makes perfect sense. In our previous report, we put forth the idea that Acura could bring the Legend name back with a successor to the RLX flagship sedan. Specifically, we were thinking that Acura would use the four-door coupe form previewed by the Acura Precision concept. That story also suggested a new Legend flagship could debut during Monterey Car Week. The 1986 Legend sedan was one of Acura's first two vehicles when the brand launched (the other being the Integra). It had a smooth 2.5-liter V6 that made all of 151 horsepower at the time. A sweet-looking coupe soon followed the sedan. The name Legend would be applied to a second-generation, which is arguably the one best-remembered. The coupe in particular has lived up to its name. Much of that legendary status, though, is the result of what followed: the Legend name and coupe body style dying for 1996 in favor of the RL, a four-door sedan as bland as its name. Acura's flagship has never recovered. We'll be quite pleased if Acura ultimately decides to reveal a totally new Legend to blow us away in Monterey. The return to actual names for the lineup would also be lovely. It's certainly working for Lincoln. Now if they'd only trademark "Integra" ...

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.