2009 Ex-l Used 3.5l V6 24v Fwd Suv on 2040-cars

Auto blog

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.

Fernando Alonso tries out fast motorcycles and Senna's McLaren

Honda closed out its racing year yesterday with its annual Thanks Day at Motegi. The event brought out an array of competition machinery and the drivers and riders who race them. That included Fernando Alonso, but rather than bring his Honda-powered McLaren, the two-time world champ took the opportunity to try out some different equipment. While MotoGP rider Marc Marquez slipped behind the wheel of the NSX Concept GT, his countryman Alonso hopped on his RC213V motorcycle for a couple of laps. Fernando isn't the first racer to swap between F1 and motorcycles: Michael Schumacher tried his hand and motorcycle racing from time to time, Valentino Rossi tested Ferrari grand prix cars on numerous occasions, and of course John Surtees won championships in both spheres – but he remains the only one to have done so. Fernando also had the chance to drive a McLaren-Honda MP4/6, just like the one with which Ayrton Senna successfully defended his title in the 1991 Formula One World Championship. That was the first time McLaren ran a Honda V12, but the last time a V12 – or a manual transmission – won the championship. After the following season, Honda and McLaren parted ways – only to be reunited this year with Alonso and Button behind the wheel. While Alonso was toying around with Senna's car, Takuma Sato – who drove Hondas in Formula One and now in Indy – tried his hand at the 1968 Honda RA301. That machine was also powered by a Honda V12, but at 440 horsepower, was far less potent than the 735+hp version that would later power Senna's. John Surtees drove one just like this in the '68 world championship, retiring from most of the races on the calendar but scoring two podiums from the three that he did finish. Marquez and his teammate Dani Pedrosa also competed in the CBR250 spec race, rode the mid-80s-era NSR500 bikes. They drove in four-wheel spec race as well in modified Honda N-One kei cars. The event served to cap a full year of racing for the Japanese automaker, which competes in a range of racing disciplines including F1, Indy, Super GT, the World Touring Car Championship, and numerous classes of motorcycle racing. Featured Gallery Fernando Alonso at Honda Thanks Day 2015 View 11 Photos News Source: Honda via Autosport Motorsports Honda motogp

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.