2014 Honda Odyssey Ex on 2040-cars

Auto blog

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.

IndyCars parade across Golden Gate Bridge for Justin Wilson [w/video]

Seeing IndyCars driving on public roads is a rare treat, especially on an iconic landmark like the Golden Gate Bridge. Unfortunately, the exciting sight came on a very somber occasion. On August 27, a parade of five racecars sped across the famous span in large part to memorialize fellow driver Justin Wilson. In an incredibly touching scene, teammate Marco Andretti led the pack, and he was behind the wheel of Wilson's number 25 Andretti Autosport Honda. "It was an honor to drive Justin's car. It was emotional for sure," Andretti said to the IndyCar Series. Behind him were Graham Rahal, Will Power, and Josef Newgarden. James Hinchcliffe was in a two-seater IndyCar to deliver the Aston Cup to the season finale at Sonoma Raceway. Two safety vehicles were also part of the procession, and they were flying Justin Wilson flags. Wilson passed away earlier this week after being struck in the head by a carbon-fiber nosecone from a crash ahead of him during the ABC Supply 500 at Pocono Raceway. Since then there has been an outpouring of support from the motorsport world for the 37-year-old racer's family. You can watch a clip of the driver's crossing the Bridge, below. News Source: NBC Bay Area, IndyCarImage Credit: Eric Risberg / AP Photo Motorsports Honda Racing Vehicles Videos IndyCar andretti autosport james hinchcliffe sonoma raceway golden gate bridge josef newgarden

Bosch builds an infotainment system that just might not suck

As far as we've come with in-car infotainment and interfaces over the past decade or so, we still have a long way to go — as most current systems show. Whether it's high-end brands like Mercedes-Benz with its kludgy COMAND system, which we hope will be replaced with the MBUX platform revealed at CES, or more mainstream vehicles like Hondas (with their frustrating, knobless Display Audio interface), getting the kind of content and ease of use in the car that we're used to having on other connected devices is far too complex and sometimes costly. While Apple and Google have tried to ride to the rescue with CarPlay and Android Auto, respectively, they're limited solutions. No automaker or tech supplier has been able to deliver an easy, economical, flexible and non-distracting infotainment solution. But Bosch could be closing in on this elusive goal, given the digital cockpit concept demo I recently received at CES. Displayed in a Cadillac Escalade, the concept featured five interconnected color screens: one in the instrument cluster, two in the center console, and two more in the front-seat headrest for second-row passengers. The digital cockpit concept demo had cool features such as haptic-feedback touch-screen controls that created an edge-like feeling similar to a physical button, facial recognition to confirm driver credentials, and the intelligence to know the location of a phone in the car to lock it out to keep the driver from texting. The most significant aspect of the Bosch digital cockpit concept wasn't visible — but shows the company's vision for a future of seamless, convenient, cost-effective and safe in-car infotainment. It's powered by a single electronic control unit (ECU) that can simultaneously run multiple operating systems and also separates vehicle and infotainment controls for critical safety and cybersecurity reasons. Most modern cars can have as many as 100 separate ECUs, Philip Ventimiglia, product manager for Bosch Car Multimedia North America, explained at CES, and several just for infotainment functions. "The goal is to reduce that to about 10 so that we can save cost throughout the vehicle and enable new technologies," he added. "OEMs want to put more technology into cars, but it costs money," Ventimiglia said.