2006 Honda Odyssey Ex-l on 2040-cars

Auto blog

Honda issues 'do not drive' order for older cars with recalled Takata airbags

Honda and Acura instructed owners of more than 8,000 cars built from 2001-2003 to park them until they can have their Takata airbags replaced as part of the ongoing global campaign to eliminate millions of deadly inflators. Honda says the "Alpha" generation Takata inflators can fail at rates as high as 50%, causing potentially fatal injuries from flying shrapnel in the event of a collision.  Honda and Acura models with the "Alpha" generation Takata airbags include:  2001-2002 Honda Accord  2001-2002 Honda Civic  2002 Honda CR-V  2002 Honda Odyssey  2003 Honda Pilot  2002-2003 Acura 3.2 TL  2003 Acura 3.2CL "Approximately 8,200 Honda and Acura vehicles with the most dangerous airbags are still being driven today. Honda has replaced or accounted for more than 99% of Alpha inflators, but it is absolutely critical that these remaining vehicle owners act now to protect themselves and their loved ones," Honda's announcement said. "These vehicles are 20 to 22 years old now, and the risk to vehicle occupants is dire. Alpha air bags are some of the oldest under recall, and they have a 50% failure rate. If the inflators rupture, the metal fragments ejected toward the driver’s face could kill or leave them with devastating, life-altering injuries." Honda and Acura are far from the only brands whose models were built with defective inflators. A campaign has been underway for the better part of a decade to replace millions of the devices worldwide as drivers continue to die from injuries caused by exploding inflators.  All such repairs are free of charge to customers. Acura/Honda Customer Service can be reached at 888-234-2138 or by visiting their Takata website.   Recalls Acura Honda Ownership Safety Takata airbag recall

Auto News Recap for 9.9.16 | Autoblog Minute

A recap of the week in automotive news, including Honda Civic Type R spy shots, Toyota Supra spy shots, and a teaser of the Lexus UX crossover concept. Honda Lexus Toyota Crossover Autoblog Minute Videos Original Video honda civic type r supra hot hatch lexus ux concept

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.