Cd Auto Ac Abs Power Optns Well Matned Must See!!!!! on 2040-cars

Auto blog

Honda CR-Z carbon-fiber prototype

When Honda rolled out the CR-Z a few years ago, it hoped to bridge the gap between those who would save the planet and those who would rather burn all of its resources in a glorious cloud of tire smoke. But enthusiasts recalling the CRX of 1980s vintage balked, imploring Honda to ditch the heavy battery packs and electric motors in favor of a lighter-weight, more conventional powertrain. At this point it seems less likely that Honda would do so at one end of the market than Porsche would ditch the hybrid component of its 918 Spyder at the other. But that doesn't mean Honda isn't still cooking up ways to curb the CR-Z's weight. And it had just one such idea waiting for us when we visited its Japanese R&D center at Tochigi last week.
Nestled in between the JDM hatchbacks, powertrain test mules and new technology prototypes Honda rolled out for us sat the experimental CR-Z you see here. While it may look mostly like the hybrid sport-hatch you can pick up at your local dealer (albeit blacked out), nearly all of this prototype's bodywork has been completely replaced, as have its basic underpinnings, with carbon-fiber reinforced plastic. The exotic material is usually reserved for high-end exotics, but like BMW is democratizing its use in the new i3, so too is Honda researching ways to implement the use of carbon fiber on a mass scale. This one-of-a-kind CR-Z prototype stands, for the time being, as the embodiment of that effort.
Driving Notes

Honda recalls 25k Fits over grab handle, airbag issue

Honda has issued another recall for the Fit. Only this time, it comes down to a very specific issue arising in a limited cross-section of production. The recall affects over 25,000 units in the United States alone. This problem results from the bracket affixing the rear grab handle, which was apparently manufactured incorrectly. As a result, the bracket may puncture the side curtain airbag as it deploys. That's bad news, so Honda is recalling the affected vehicles to have that bracket replaced. According to the manufacturer, the issue was discovered during its own internal testing procedures, and not because of any reported incidents. The problem only affects Fit hatchbacks from the 2015 and 2016 model years, manufactured between April 11, 2014, and July 2, 2015. Even within those confines, however, the recall is limited only to those in LX trim level and not equipped with a sunroof. That amounts to an estimated 25,367 units in the US - less than a third of the 84,000+ units American Honda sold in the same fifteen-month period. This is the third recall that has affected the Fit in as many months. Last month saw 143,000 units of the Fit and Civic recalled over a transmission issue. In September, the Japanese automaker called in another 18k Fits over a problem with their ignition coils. RECALL Subject : Improper Rear Grab Rail Bracket/FMVSS 214/226 Report Receipt Date: OCT 23, 2015 NHTSA Campaign Number: 15V697000 Component(s): AIR BAGS , STRUCTURE Potential Number of Units Affected: 25,367 Manufacturer: Honda (American Honda Motor Co.) SUMMARY: Honda (American Honda Motor Co.) is recalling certain model year 2015-2016 Fit LX-trim vehicles manufactured April 11, 2014, to July 02, 2015 and not equipped with a sunroof. In the affected vehicles, the rear grab handle brackets were not manufactured properly, and as a result, the brackets may puncture the side curtain air bags upon their deployment. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 214, "Side Impact Protection" and number 226, "Ejection Mitigation". CONSEQUENCE: If the side curtain air bags are punctured upon deployment, the outboard seat occupants may be at a higher risk of injury during a crash. REMEDY: Honda will notify owners, and dealers will replace the rear grab handle bracket, free of charge. The recall is expected to begin December 4, 2015. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is JV8.

Honda Accord sets the pace as Indy safety car with HPD upgrades

Honda has rolled out a new pace car to lead the pack in the IndyCar Series. But it didn't just slap some graphics and auxiliary lighting on a production model and call it a day. Honda Performance Development (HPD) was tasked with giving the Accord coupe a thorough overhaul to prepare it for the task at hand. To the 3.5-liter V6, HPD bolted a Borg-Warner turbocharger and fitted high-flow fuel injectors and custom intake, exhaust, pistons, connecting rods and intercooler as well as the crankshaft from the Acura RLX to drive output up to 400 horsepower. The transmission was beefed up as well, with a limited slip differential to help get the power down to the track surface. To keep it all in check, HPD fitted new brakes, a stiffened suspension and rolling stock. It's all been topped off with a factory aero kit, special graphics and lighting, with Sparco seats and four-point racing harnesses fitted inside. The latest in a series supplied by Honda since 2006, the Accord safety car made its debut this weekend at the Honda Indy Grand Prix of Alabama at Barber Motorsports Park. Honda Unveils 2015 Accord Safety Car Apr 24, 2015 - TORRANCE, Calif. - Will pace IndyCar Series races starting Sunday at Barber Motorsports Park - Latest in series of Honda safety cars for Indy car competition - Production 2015 Honda Accord modified by Honda R&D Americas Honda today unveiled the 2015 Honda Accord Safety Car, which will lead the Verizon IndyCar Series field to the green flag for Sunday's Honda Indy Grand Prix of Alabama at Barber Motorsports Park. The latest in a series of Honda Safety Cars utilized since 2006 for Indy car competition, the 2015 Honda Accord Safety Car is a production model featuring performance enhancements created by Honda R&D Americas, Inc., for its new role. "The 2015 Honda Accord Coupe is an ideal match for IndyCar Safety Car duties," said Jim Lee, manager of Experiential Marketing for American Honda. "Taking its already large and powerful 3.5-liter V6 engine, we asked the team at Honda R&D Americas to enhance and develop a car that is perfectly suited to lead the Verizon IndyCar Series field. I think they accomplished all that we asked, and more." The Honda R&D team started with a production Honda Accord Coupe, then added a mix of engine and chassis modifications to create a fun, fast vehicle fully capable of pacing Indy cars at both road courses and oval tracks across North America.