2004 Honda Element on 2040-cars

Auto blog

Honda working with new supplier Autoliv for Takata inflator recall

Takata is fighting against US regulators over whether to expand its airbag inflator recall nationwide, but the affected automakers are continuing to broaden their own campaigns to get these vehicles fixed. Honda is the first company to take the bold move of partnering with another supplier for its replacement parts. It just announced plans to work with Autoliv to create components for models needing repaired in the US. "The agreement is made in order to meet the expanded supply of inflators needed by Honda and is subject to definitive documentation," Autoliv said in a statement. The company plans to add the extra capacity for these replacement parts at its existing factories, and deliveries are expected to begin in six months. The decision to switch suppliers was quite surprising because the choice was largely considered impractical previously. Automakers believed that changing manufacturers could take as long as a year or more to implement. However, Autoliv apparently found a way to accelerate that. According to Reuters, Honda said at a hearing in the House of Representatives on December 3 (pictured above) that it was in talks with Autoliv and another supplier called Daicel about building more inflators. The extra parts are sure to come in handy for Honda, as it is now officially expanding its driver side inflator recall nationwide. Although, that that option was already available to any concerned drivers who asked for the remedy. Even with added capacity, Takata had estimated it would take two years to manufacturer enough replacements to fix all of the affected vehicles from all of the automakers. Scroll down to read Autoliv's statement on its new role. Autoliv to supply replacement airbag inflators to be used by Honda (Stockholm, December 3, 2014) – – – Autoliv, Inc. (NYSE: ALV, and SSE: ALIV sdb), the worldwide leader in automotive safety, will supply replacement airbag inflators to be used by Honda Motor Company in support of the ongoing field action initiatives in the United States. The agreement is made in order to meet the expanded supply of inflators needed by Honda and is subject to definitive documentation. In order to be able to meet increased demand, Autoliv will build additional inflator capacity in its existing manufacturing facilities. Deliveries are estimated to commence after a period of about six months from today.

Acura NSX prototype gets back on track

Developing a new vehicle is not without its complications, we're sure, but usually things follow a fairly predictable progression: you develop a prototype, you test it, test it and test it again, then you put it into production. What you don't expect is that your prototype will burn to the ground, but that's what famously happened to the NSX which Honda engineers were testing a few months ago.
Fortunately, the Acura NSX prototype is back on track, both literally and figuratively, as you can see from this latest batch of spy shots snapped at the Nürburgring. This camouflaged prototype looks pretty much the same as the last one, only, you know... less crispy. Which is to say, it looks pretty much ready to hit showrooms.
The naysayers may point out that Honda chose colder and damper weather to put the NSX back into testing - thereby mitigating the risk of another fire - but we're sure the Japanese automaker has been working hard to fix the flammability issues, whatever may have caused them, over the past few months. At least, we hope they have.

Honda Project 2&4 concept has 212 hp, 893 lbs, and our hearts

Take one look at the Honda Project 2&4 concept, and it's immediately clear that the minimalist track special is the result of a collaboration between automotive and motorcycle designers. The body's styling is a modernized take on the Japanese brand's RA272 Formula One car from the 1960s, but then you notice the weird driver's seat that's fully exposed and suspended just inches above the road. The result is a vehicle that looks absolutely deadly, but like an absurd thrill to pilot, too. The Project 2&4's floating seating design simultaneously evokes both a sport bike and a go-kart. There's no dashboard or windshield at all, and the driver simply gets a steering wheel and a glass panel for the instruments. It's hard to imagine pairing things down much more than this, especially since the whole vehicle weighs just 893 pounds. The concept's other major piece of motorcycle DNA is the mid-mounted 1.0-liter V4 sourced from Honda's RC213V that races in MotoGP. Tuned here for road use, it puts down over 212 horsepower when spinning at 13,000 rpm, and peak torque of 87 pound-feet hits at a still stellar 10,500 rpm. The redline is at a stratospheric 14,000 rpm. The high-revving engine bangs through the gears through a six-speed dual clutch transmission. Unfortunately, the Project 2&4 has zero provisions for even a modicum of driver safety, and that makes it exceedingly unlikely for one to ever see customer orders. We still look forward to seeing that bizarre, floating seat on display at the 2015 Frankfurt Motor Show, though. HONDA PROJECT 2&4 POWERED BY RC213V TO DEBUT AT FRANKFURT: A COMBINATION OF GLOBAL CREATIVITY AND CRAFTSMANSHIP Winner of Honda's 'Global Design Project' to debut at the Frankfurt Motor Show Cabin-less structure features a floating seat design for immersive driving experience Powered by Honda's MotoGP RC213V engine, modified to run on public roads 'Honda Project 2&4 powered by RC213V', the winning entry from Honda's 'Global Design Project', will make its global debut at the 66th Frankfurt Motor Show at stand B11 in Hall 9.0. Embodying the concept of 'creative craftsmanship', Honda Project 2&4 celebrates Honda's position as the world's leading engine manufacturer, providing engines to 28 million people per year across two- and four-wheel automotive, power equipment, marine and aerospace applications.