No Reserve!! Top End Engine Rubbing Noise on 2040-cars

Auto blog

Next Honda Civic to get 1.5L turbo

The low-displacement, turbocharged engine is all the rage these days throughout the auto industry, whether considering the 1.0-liter, three-cylinder EcoBoost from Ford or even Ferrari opting for a downsized turbo V8 in the latest 488 GTB. It looks like Honda might be the next one to follow this trend, and it could happen as soon as the next-gen Civic. "Downsized turbocharging will be the base, even for the Civic," Honda Research and Development boss Yoshiharu Yamamoto said to Automotive News. That included the US, he indicated. "Quite a bit will switch over to turbo, but there will still be some naturally aspirated ones remaining." The engine reportedly is a turbocharged 1.5-liter four-cylinder that offers better fuel economy, lower emissions and the power of a naturally aspirated mill of between 2.0- and 2.4-liters, according to AN. Since the current Civic gets 143 horsepower from its 1.8-liter four that suggests a healthy power bump for the future model. Making the news even more tantalizing, the new Civic with the 1.5-liter turbo could be revealed before the end of the year, according to Automotive News. Honda already confirmed a $340 million investment into its Anna, Ohio, plant to build the engines later this year. Honda first mentioned a 1.5-liter turbocharged four-cylinder in 2013 along with the 2.0-liter turbo now in the Civic Type R in Europe. At the time, the brand said these engines would appear in "a number of future global models." The HR-V in the US was also previously rumored to use the same powerplant.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

A look inside Honda’s “Safety For Everyone” research and development operation

RAYMOND, Ohio—As part of its long-running “Safety for Everyone” campaign, Honda has established the audacious goal of what it calls a “zero-collision society.” But rather than making big claims about developing a fully-autonomous vehicle, which Honda hasnÂ’t done, the company is trying to chip away at the more than 37,000 vehicle-related fatalities that occurred in the U.S. in 2017 with a multi-pronged approach. Here in central Ohio, engineers are working with state-of-the-art facilities and equipment to boost active safety systems like its HondaSensing suite of safety technology with old fashioned passive systems like structural steel frames or new airbag designs that protect passengers in a crash. Honda provided members of the press with a rare tour inside its Honda R&D Americas headquarters this week. Honda officials say that increasingly, safety — and specifically, third-party ratings from the likes of the National Highway Safety Traffic Administration and the Insurance Institute for Highway Safety — figure into the top three factors consumers weigh when purchasing a vehicle. Honda and Acura have 10, 2019 models that have earned IIHSÂ’s Top Safety Pick or Top Safety Pick+ ratings, and all 15, 2019 model-year Honda and Acura vehicles that have undergone NHTSA crash testing have earned a 5-star overall rating. And Honda prides itself on its growing list of safety firsts, including the first upward-deploying front passenger airbag, in 1990 in the Acura Legend; first omni-directional crash-test facility, in 2000; and the first autonomous braking system, in the 2006 Acura RL. It hopes its new three-chamber airbag goes industry-wide and joins that list. “ItÂ’s part of our companyÂ’s culture,” said Art St. Cyr, business head unit and vice president of auto operations for American Honda Motor Co. “We have a philosophy at Honda that we want to be a company that society wants to exist. That means we have to protect our customers. ThatÂ’s part of the whole mantra of doing this.” Opened in 1984, the 1.6 million square-foot Honda R&D Americas facility, located in the countryside about 45 miles northwest of Columbus, employs around 1,600 people and is HondaÂ’s largest research-and-development facility outside of Japan. Its Advanced Safety Research facility opened in 2003.