2018 Honda Cr-v Lx on 2040-cars

Auto blog

2015 Pikes Peak Hill Climb: Practice Day 1

Based on what we learned from the first day of practice for the 2015 Pikes Peak International Hill Climb, the quickest race pace up the paved road to more than 14,000 feet above sea level may not be from internal combustion locomotion anymore. "If it all goes well, and the planets align, [under nine minutes] shouldn't be out of the question," said Paul Wilding, team manager for Nobuhiro "Monster" Tajima's Rimac Automobili Monster Sport E-Runner entry. Wilding added that if Tajima's car held up during the week it could finish first overall, which would be the first time an EV takes the overall crown at the hill climb. Last year, the gap between overall winner Romain Dumas' Norma M20 RD Limited and the fastest EV was just over two seconds. In the 2014 race, Tajima finished third in his class. "We think this car is the fastest way up now," said Wilding. "There's no affect from the altitude – this car is a monster, our driver is a monster." The practice, which isn't mandatory but is sanctioned by race officials, concluded Tuesday morning with a few surprises ahead of Sunday's race. Tajima will be racing for the fourth consecutive year in the all-electric modified division. Wilding said today's conditions weren't ideal and the race Sunday could be more challenging than initially expected. "It was a lot bumpier than we expected today," he said. "But today means nothing. It was all [reconnaissance]. Tomorrow means everything." The Honda ARX-04B LMP2 prototype brought to Pikes Peak had a difficult start to the week. Honda Racing spokesman Eric Mauck said the car struggled and didn't run in practice Tuesday. "We're looking for data and research more than anything else," Mauck said. "We're not going for Sebestain's record this year, we're just looking to gather information for years to come." Colorado-native, Honda driver, and Formula E racer Justin Wilson will pilot the LMP2 up the mountain Wednesday – assuming the car is ready. "He's obviously a guy that Honda thinks very highly of. Anytime we have an opportunity to put Justin behind the wheel of anything we want to," Mauck said. Honda driver Tetsuya Yamano, who is driving an all-electric Honda CR-Z in the exhibition class, echoed Mauck's assessment. "We're not making a racecar," Yamano said through an interpreter. "This is part of [research and development] and we're looking to get as much data back to engineers in Japan as possible ...

Racy, mysterious Honda spied in Spain

The next-gen Honda Civic five-door has been spotted near the IDIADA Proving Grounds in Spain, and Pistonudos was able to snap several photos of it covered in camouflage there. However, compared to the last spy shots we saw of this body, there have been some odd changes made for the latest test car. In front, the grille still wears a similar look to the pre-refresh Acura ILX like in the last photos. Although, this version might be a bit closer to production because as in the patent drawings, the air dam now sports three lower intakes. In profile, this Civic is largely the same as the earlier shots too, but now you get a better look at the tail's shape. The big, lightweight wheels and small brake discs are certainly odd on this example, though. The rear is where things get really strange because of the three exhaust pipes right in the middle of the bumper. Making things even weirder, the center one has a smaller diameter than the others. Because the Honda Civic Concept used a single, center-mounted setup, perhaps this is a way to test that design. Taken in total, this Civic test car is a head-scratcher. The bizarre exhaust layout and big wheels suggest a performance version, but the rest of the design doesn't look aggressive enough. One possible explanation is that Honda is testing a few components for the next Civic SI here. That would explain why some bits look racy but not the whole car. Related Video:

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.