2003 Honda Cr-v Ex Sport Utility 4-door 2.4l on 2040-cars

Auto blog

Comma.ai makes your car semi-autonomous for $999

At TechCrunch's Disrupt conference in San Francisco, Comma.ai founder George "Geohot" Hotz announced the launch of the Comma One semi-autonomous driving device. Hotz said at the conference that his company has worked on the Comma One for about a year, and it will be available at the end of the year for $999 and a $24 per month subscription fee. But aside from the reasonable price, which TechCrunch points out is possible thanks to off-the-shelf components, the appeal here is that it's an add-on to an existing car that can be installed at home by the car's owner. This gives people with normal cars the opportunity to have semi-autonomous features without having to buy an entire vehicle... that is, if you have a Honda or Acura with lane-keeping assist, since Comma One is currently only compatible with those vehicles. It remains to be seen if the company will add more vehicles to the list over time. The device is roughly the size of a large cell phone or aftermarket navigation system, and it has a screen on the front and a pair of cameras on the back. The computer combines information from the device's cameras and the car's radar sensors to understand what's happening and how to respond. Hotz explained at the conference that this system is similar in capability to the Tesla Autopilot system, and will be able to complete a drive, start to finish, without the driver having to touch anything. He did however emphasize that the driver must still pay attention in the event something goes wrong, comparing the experience to watching a young student driver. Hotz told TechCrunch that the device should start shipping at the end of the year. He also said that owners of compatible Honda products in the San Francisco area are eligible for beta testing, and can get involved by emailing him at george@comma.ai. So if you've been pining for a semi-autonomous vehicle of your own, but couldn't spring for a Tesla, you won't have to wait much longer. We should point out that we don't know yet how well the system works, though we hope to find out soon. Related Video:

Honda recalls 2016 Civic 2.0-liter engine for piston issue

The Basics: Honda will recall 42,129 examples of the 2016 Honda Civic sedan with the 2.0-liter four-cylinder engine in the US. These models have build dates between September 22, 2015, and February 3, 2016. The issue does not affect the Civic Coupe. The Problem: The pistons might not have a wrist pin circlip or the part's installation could be incorrect. This problem could cause the engine to seize, leading to engine damage and an increased risk of fire or a crash. Injuries/Deaths: There are no deaths, but there was an unconfirmed report of a minor injury that didn't require medical attention, according to Honda. There was also a report of one engine fire, which was separate from the minor injury. The Fix: Dealers will inspect the engines and replace any damaged parts as necessary. If You Own One: Honda won't have the parts ready until this summer. Owners will receive initial notification about the recall in March, and they'll get a second letter when the components are ready. More Information: Honda already issued a stop sale on the 2016 Civic Sedan equipped with the 2.0-liter engine due to this problem. RECALL Subject : Piston Wrist Pin Circlips may not be Secured Report Receipt Date: FEB 09, 2016 NHTSA Campaign Number: 16V074000 Component(s): ENGINE AND ENGINE COOLING Potential Number of Units Affected: 42,129 All Products Associated with this Recall close Vehicle Make Model Model Year(s) HONDA CIVIC 2016 Details Manufacturer: Honda (American Honda Motor Co.) SUMMARY: Honda (American Honda Motor Co.) is recalling certain model year 2016 Civic vehicles manufactured September 22, 2015, to February 3, 2016 and equipped with 2.0L engines. The affected vehicles have engines with piston assemblies that may have been manufactured without a piston wrist pin circlip or with an incorrectly installed piston wrist pin circlip. CONSEQUENCE: If a circlip is missing or incorrectly installed, the piston wrist pin may not be secure and may drift and damage the engine cylinder causing the engine to seize, and increasing the risk of a crash or a fire. REMEDY: Honda will notify owners, and dealers will inspect and replace the piston assemblies, as necessary, free of charge. Parts are expected to be available in the Summer of 2016. Owners will be mailed an interim notification beginning March 15, 2016, and will be mailed a second notice when parts are available. Owners may contact Honda customer service at 1-800-999-1009. Honda's number for this recall is JX9.

Honda Project 2&4 concept has 212 hp, 893 lbs, and our hearts

Take one look at the Honda Project 2&4 concept, and it's immediately clear that the minimalist track special is the result of a collaboration between automotive and motorcycle designers. The body's styling is a modernized take on the Japanese brand's RA272 Formula One car from the 1960s, but then you notice the weird driver's seat that's fully exposed and suspended just inches above the road. The result is a vehicle that looks absolutely deadly, but like an absurd thrill to pilot, too. The Project 2&4's floating seating design simultaneously evokes both a sport bike and a go-kart. There's no dashboard or windshield at all, and the driver simply gets a steering wheel and a glass panel for the instruments. It's hard to imagine pairing things down much more than this, especially since the whole vehicle weighs just 893 pounds. The concept's other major piece of motorcycle DNA is the mid-mounted 1.0-liter V4 sourced from Honda's RC213V that races in MotoGP. Tuned here for road use, it puts down over 212 horsepower when spinning at 13,000 rpm, and peak torque of 87 pound-feet hits at a still stellar 10,500 rpm. The redline is at a stratospheric 14,000 rpm. The high-revving engine bangs through the gears through a six-speed dual clutch transmission. Unfortunately, the Project 2&4 has zero provisions for even a modicum of driver safety, and that makes it exceedingly unlikely for one to ever see customer orders. We still look forward to seeing that bizarre, floating seat on display at the 2015 Frankfurt Motor Show, though. HONDA PROJECT 2&4 POWERED BY RC213V TO DEBUT AT FRANKFURT: A COMBINATION OF GLOBAL CREATIVITY AND CRAFTSMANSHIP Winner of Honda's 'Global Design Project' to debut at the Frankfurt Motor Show Cabin-less structure features a floating seat design for immersive driving experience Powered by Honda's MotoGP RC213V engine, modified to run on public roads 'Honda Project 2&4 powered by RC213V', the winning entry from Honda's 'Global Design Project', will make its global debut at the 66th Frankfurt Motor Show at stand B11 in Hall 9.0. Embodying the concept of 'creative craftsmanship', Honda Project 2&4 celebrates Honda's position as the world's leading engine manufacturer, providing engines to 28 million people per year across two- and four-wheel automotive, power equipment, marine and aerospace applications.