Ex-l 2.4l Cd Automatic Leather Sun/moonroof on 2040-cars

Auto blog

Brand new cars are being sold with defective Takata airbags

If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Honda reveals IndyCar aero kit

The IndyCar Series is stepping into a new era of competition that won't quite see manufacturers building their own chassis like they do in Formula One, but it's inching closer. This season, participating automakers will provide their customer teams not only with engines as they have in the past, but with complete aerodynamic packages. Chevy revealed its new aero kit last month, and now Honda – the only other automaker currently in the series – has followed suit with its own. Like Chevy's package, the new Honda kit is designed specifically for road courses and short ovals with a high degree of downforce that would hamper high-speed running around super speedways. The lower-drag package will likely be revealed sometime before the Indy 500 that will be the first speedway race on the calendar when it kicks off in May. The design of the package is a result of what Honda describes as an exhaustive development process that borrowed from the company's experience with Le Mans prototypes. It started out using CAD and CFD software before being validated on simulators, tested in wind tunnels and run on track with participation from Andretti Autosport. The aerodynamic appendages will be affixed to the existing Dallara chassis and powered by Honda's V6 engines, allowing individual teams to tweak the elements to their own requirements. With the manufacturers now allowed a greater degree of participation, series organizers will undoubtedly be hoping for more of them to join in on the action. The last time there were more than two automakers participating was in 2005, before Toyota pulled out. Ford was the sole engine supplier in the Champ Car series from 2003 until the series reunited with the Indy Racing League to form the current IndyCar Series. Honda Unveils 2015 IndyCar Series Aero Kits Mar 9, 2015 - TORRANCE, Calif. - Road Course/Short Oval package shown - Efficient development utilized CFD and multiple simulation tools - Wide range of aerodynamic tuning options available to teams Honda today debuted the package of aerodynamic upgrades and components its teams will use in the 2015 Verizon IndyCar Series, as the manufacturer seeks to add to an already impressive list of accomplishments in American open-wheel racing. The 2015 Honda Indy car "aero kit", produced by Honda Performance Development, Honda's racing arm in North America, includes nearly 200 individual pieces that can be fitted to the existing Honda-powered Dallara Indy car chassis.