2023 Honda Accord Ex on 2040-cars

Auto blog

Consumer Reports' first motorcycle reliability report finds Japanese brands ahead

Consumer Reports has released its first ever study of motorcycle reliability, and students of its ratings on cars might notice a suspicious similarity - Japanese brands require fewer repairs than the leading American or German brands.
The study analyzed the reliability of 4,680 bikes owned by CR subscribers and found that Yamaha had the best ratings, with just one in ten bikes built between 2009 and 2012 requiring a repair over a four-year period. The makers of the R1 and R6 sport bikes were closely followed by Kawasaki and Honda, while one out of every four of the rumbling bikes from Harley-Davidson experienced an issue. BMW had the worst rating of the brands represented, with one in three bikes having problems.
According to CR, neither Suzuki nor Triumph owners provided enough information for a reliable rating. Based on the responses received, though, Suzuki would have finished with the other Japanese brands and Triumph, being English, would have been one of the less reliable makes.

Honda planning sub-NSX S2000 successor

Nine years separated the arrival of the original Acura NSX and the Honda S2000. By that time, the NSX was closer to the end of its fifteen-year production cycle than it was to its beginning. The latest word has it that not only is Honda planning a successor to the S2000, but it's not about to wait that long after the new NSX arrives before it's rolled out.
While the S2000 was a front-mid-engined roadster, its successor will, according to the latest from Auto Express (which we are taking with a grain of salt), be a mid-engined coupe - closer, in other words, to the NSX than the S2000. Power would come from a more potent version of the 2.0-liter turbo four developed for the upcoming new Civic Type R, possibly as part of a hybrid system derived from Honda's upcoming Formula One powertain to develop over 400 horsepower.
Whether the new sports car would revive the S2000 nameplate, and whether it would wear the Honda or Acura badge in the United States, remain to be seen. As does its potential production site: while the previous S2000 was built at the same Takanezawa plant in Tochigi as the original NSX, the new NSX will be built at the new Performance Manufacturing Center in Marysville, Ohio. The new S660 roadster, meanwhile, is set to be assembled at the same Yachiyo plant in Yokkaichi as the original Honda Beat.

Honda Project 2&4 concept has 212 hp, 893 lbs, and our hearts

Take one look at the Honda Project 2&4 concept, and it's immediately clear that the minimalist track special is the result of a collaboration between automotive and motorcycle designers. The body's styling is a modernized take on the Japanese brand's RA272 Formula One car from the 1960s, but then you notice the weird driver's seat that's fully exposed and suspended just inches above the road. The result is a vehicle that looks absolutely deadly, but like an absurd thrill to pilot, too. The Project 2&4's floating seating design simultaneously evokes both a sport bike and a go-kart. There's no dashboard or windshield at all, and the driver simply gets a steering wheel and a glass panel for the instruments. It's hard to imagine pairing things down much more than this, especially since the whole vehicle weighs just 893 pounds. The concept's other major piece of motorcycle DNA is the mid-mounted 1.0-liter V4 sourced from Honda's RC213V that races in MotoGP. Tuned here for road use, it puts down over 212 horsepower when spinning at 13,000 rpm, and peak torque of 87 pound-feet hits at a still stellar 10,500 rpm. The redline is at a stratospheric 14,000 rpm. The high-revving engine bangs through the gears through a six-speed dual clutch transmission. Unfortunately, the Project 2&4 has zero provisions for even a modicum of driver safety, and that makes it exceedingly unlikely for one to ever see customer orders. We still look forward to seeing that bizarre, floating seat on display at the 2015 Frankfurt Motor Show, though. HONDA PROJECT 2&4 POWERED BY RC213V TO DEBUT AT FRANKFURT: A COMBINATION OF GLOBAL CREATIVITY AND CRAFTSMANSHIP Winner of Honda's 'Global Design Project' to debut at the Frankfurt Motor Show Cabin-less structure features a floating seat design for immersive driving experience Powered by Honda's MotoGP RC213V engine, modified to run on public roads 'Honda Project 2&4 powered by RC213V', the winning entry from Honda's 'Global Design Project', will make its global debut at the 66th Frankfurt Motor Show at stand B11 in Hall 9.0. Embodying the concept of 'creative craftsmanship', Honda Project 2&4 celebrates Honda's position as the world's leading engine manufacturer, providing engines to 28 million people per year across two- and four-wheel automotive, power equipment, marine and aerospace applications.