1997 Honda Accord Honda Wagon on 2040-cars

Auto blog

100th Pikes Peak Hill Climb brings bad weather, heartbreak

Hill climb? Please. While Europeans spent the weekend driving up a nobleman's driveway at the Goodwood Festival of Speed, we in 'Murica got down and dirty with the 100th running up Pikes Peak. In a reversal of stereotypes, it is we who have understated. The "hill" climb ascends one of the tallest peaks in the Rockies, to a finish line that's 14,115 feet above sea level. To get there, it takes 156 turns over 12.42 miles, some of which just look like paved sky, because they have have no guardrails between the asphalt's edge and sheer dropoffs. In reality, the Pikes Peak International Hill Climb is even older than 100 years. The first event took place in 1916, but in 1917-19 and 1942-45, the so-called Race to the Clouds was put on hiatus due to a couple of world wars. This year's event was marked by damp weather that dashed the hopes of several teams' efforts to break new records. David Donner's Porsche 911 Turbo S Lightweight Package, for example, was widely expected to reclaim the production car record this year. Donner is a three-time PPIHC champ, and set the 2014 production car record in a 991-generation Turbo S.  A Bentley Continental GT piloted by Rhys Millen beat it in 2019, so Porsche was keen on taking it back. Donner broke the production qualifying time earlier in the week, but even the seasoned pro couldn't put his skills to tarmac due to moisture-laden surfaces and low-visibility from thick fog on race day. The result was 10:34.053, over 15 seconds slower than Millen's 10:18.488, still good enough to land the class's top spot and second overall. Acura arrived in Colorado to conduct its much-touted motorsports debut of the 2023 Integra. While the entry-level sports sedan, equipped with a stock engine but modified with a slew of HPD goodies, came in ninth in the production class, Acura didn't go home emptyhanded. A 2022 NSX Type S driven by Nick Robinson took the category's third spot. Taking second was Daijiro Yoshihara with a Tesla Model S. In recent years, electric cars have become a force to be reckoned with, especially since they are immune to high altitudes that negatively impact internal combustion cars. Poor conditions sent newcomer Levi Shirley's Ultra 4 buggy off course. Fortunately, it was near the lower sections, where there's still a significant amount of runoff past the pavement's end. Amazingly, Shirley landed wheels down in the video above, and simply continued driving through the pea soup haze.

Honda Accord under investigation due to airbag failures

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the possibility of airbags not deploying in the 2008 Honda Accord. The agency has received 19 reports, including one injury, of the airbag control module failing, and the part is on an estimated 384,000 of the vehicles in the US. "For vehicles with a failed SRS module, some or all of the airbags may be unavailable in a crash warranting deployment," NHTSA's investigation says. Drivers are warned when the part stops working by a light on the instrument panel, but several of these reports indicate the module is unable to show diagnostic trouble codes when being inspected. The only way to fix the issue is to replace the whole component, and the Detroit News reports that can cost $500 or more. NHTSA's preliminary evaluations investigate "the scope, frequency, and consequence" of a problem and don't necessarily mean a recall is warranted. INVESTIGATION Subject : SRS Module Failure Date Investigation Opened: AUG 18, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15029 Component(s): AIR BAGS All Products Associated with this Investigation close Vehicle Make Model Model Year(s) HONDA ACCORD 2008 Details Manufacturer: Honda (American Honda Motor Co.) SUMMARY: ODI has identified 19 VOQ reports alleging failure of the air bag SRS control module. One of the reports involved a frontal crash event where the frontal air bags did not deploy. The crash resulted in an injury to the driver and lone occupant, and the vehicle was subsequently inspected by the agency. According to the reports, the failure of the SRS module is indicated by the air bag readiness indicator lamp illuminating on the instrument panel. Consumers report the SRS control module had to be replaced to correct the condition. Several reports indicated that the SRS module was unable to communicate thus preventing diagnostic trouble codes from being retrieved. An inability of the SRS unit to communicate raises concern about the readiness of the entire supplemental restraints system. As a result, for vehicles with a failed SRS module, some or all of the air bags may be unavailable in a crash warranting deployment. ODI is opening this investigation to further evaluate the scope, frequency, and consequence of the alleged SRS module failures.

Fire up your 3D printer! Honda releases data for several of its past concepts [w/video]

Futurists have been treating 3D printing like it is the second coming of the Industrial Revolution for years. Everyone will have a 3D printer in their garage and be able make practically anything at home before you know it, right? Well... not quite.
While we can imagine a piece of trim breaking on our car and being able to download the file to print a new one at home, the reality is that 3D printing is still in its earliest stages as a consumer device. Still, Honda is capitalizing on the technology by allowing people to make models of its concept cars at home.
The Honda 3D Design Archive currently consists of five models based on the Fuya-Jo, FSR, Kiwami, Puyo, and NSX concepts. The printer files can be downloaded from the web and carry Creative Commons 4.0 licenses, which allow them to be freely shared. Honda promises that more files will be added to the archive soon.