2dr Roadster Manual Convertible 2.0l Cd Locking/limited Slip Differential Abs on 2040-cars

Auto blog

Honda's latest fuel pump recall covers 761,000 vehicles worldwide

Honda will recall around 761,000 vehicles worldwide to replace fuel pumps that could fail and lead to stalling engines. This recall, which is described in the National Highway Safety Administration campaign number 21V215000, isn't the Japanese automaker's first recall for bad fuel pumps. It includes 628,000 vehicles sold in the United States. Honda isn't aware of any crashes or injuries related to the issue. This most recent recall includes models from both Acura and Honda, some from 2019 only and others stretching into the 2020 model year. From Acura, some ILX, MDX, MDX Sport Hybrid, RDX and TLX models are included. From Honda, the recall covers certain Accord (including the Hybrid), Civic (Coupe, Sedan and Hatchback and including the Si and Type R), Fit, HR-V, Odyssey, Passport, Pilot and Ridgeline. Finally, some Honda CR-V models from 2018 and 2019 are also included. Less than a year ago, Honda issued a recall over the fuel pumps of 136,057 vehicles in the U.S., some of which seem to overlap with this latest recall. Back in 2019, two separate recalls covered well over half a million vehicles for other fuel pump-related maladies, though it's not clear if any or all of these issues are related. With so many recalls over fuel pumps, it would be a good idea for owners of 2018-2020 Honda vehicles to enter their VIN numbers at either Honda's dedicated recall website or use the various tools provided by NHTSA. Related video: Featured Gallery 2019 Honda Pilot View 37 Photos Green Recalls Acura Honda

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.