Find or Sell Used Cars, Trucks, and SUVs in USA

2001 Honda S2000 2.0l 9,000 Rpm - Great Shape! on 2040-cars

US $10,800.00
Year:2001 Mileage:91420
Location:

Amarillo, Texas, United States

Amarillo, Texas, United States
Advertising:

Selling my '01 Silverstone Metallic S2000. It's a great running & driving car and has been ultra reliable, but I've got a few more important things I need and too many vehicles; this one's the least practical so it's got to go. It's relatively stock and most of the "upgrades" were made out of necessity. Rarely driven in anger, babied and pampered for the two years I've owned it. Everything works EXACTLY how it should; A/C blows COLD, engine starts perfect, purrs like a kitten at idle, vtec engages how it should; no warning lights on the cluster.

  • Body: 8/10 - A few minor paint chips in the fenders from road debris.
  • Interior: 7/10 - Typical wear on left drivers seat bolster and seat bottom, minor wear on carpet, wear & tear on shifter trim.
  • Soft Top: 7/10 - Good condition for it's age. Light clouding on the plastic rear window, beginning to tear on both sides at the plastic flaps but they're only about 1/4"-1/2" in length right now; should be no issue to patch and keep hidden if caught soon.

  • Oil changed every 3k miles with Castrol GTX 10w30
  • Cooling system flushed 1k miles ago
  • Transmission and rear diff fluids changed 10k miles ago
  • Valves adjusted 5k miles ago
  • Spark Plugs replaced 5k miles ago
  • Registration and TX state inspection valid until 2015


"MODS"
  • Full Blown aluminum radiator - Stock radiator fans
  • Hasport 62a Billet Engine Mounts - Supposed to have been stock replacement; GREAT feel and power transfer while driving, but they cause quite a bit of in-cabin vibration at idle RPM
  • Aeromotive Stealth Fuel Pump (installed in anticipation of a future turbo, still have stock)
  • Stainless Steel Straight Pipe after cat to right behind the rear axle (still have stock exhaust minus flange, used for straight pipe)
  • No-Name / Ebay front lip, unpainted but in excellent condition. Decent fit.
  • ** Hardtop previously included is no longer available and will be sold separately**


CONS
  • Excessive in-cabin vibration due to Hasport mounts; not unbearable, just a minor annoyance at times
  • The straight pipe exhaust is loud. Not unbearable, but I really enjoy the sound the F20c makes, even while cruising; not everyone will.
  • Drivers side soft top latch is wearing and causes wind noise at highway speeds; still holds tight against rain and car washes.

 The title is clear, but there is still an open bank loan on the vehicle; the final loan payment to be made after full payment for the vehicle is received. The winning buyer is welcomed/encouraged to accompany me to the bank to complete the transaction. The account is current and in good standing.

Auto Services in Texas

World Tech Automotive ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automotive Tune Up Service
Address: 213 E Buckingham Rd Ste 106, Fate
Phone: (972) 414-5292

Western Auto ★★★★★

Automobile Parts & Supplies, Tire Dealers, Wheels
Address: 106 W Clayton St, Hull
Phone: (936) 258-3181

Victor`s Auto Sales ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 5808 Manor Rd, Geneva
Phone: (512) 270-5635

Tune`s & Tint ★★★★★

Automobile Parts & Supplies, Glass Coating & Tinting Materials, Consumer Electronics
Address: Booker
Phone: (806) 373-8863

Truman Motors ★★★★★

Used Car Dealers
Address: 5701 Burnet Rd Ste B., Cedar-Park
Phone: (512) 765-4494

True Image Productions ★★★★★

Auto Repair & Service
Address: N Waddill St, Copeville
Phone: (972) 542-4445

Auto blog

Honda to spool up turbos, workforce with F1 tech

Fri, 22 Nov 2013

Honda has had a longer and more tumultuous relationship with Formula One than just about any other automaker. It had only been building cars for four years before it entered F1 in 1964 as the first Japanese team in the series, winning its first race the following season but shuttering the program a few years later. Honda came back to power the likes of Williams and McLaren to several World Championships in the '80s and '90s, but things took a downturn when it started a partnership and ultimately took over British American Racing. After pouring untold billions into the effort, the economy tanked, and Honda ultimately sold the team, which subsequently claimed the championship - under new ownership and Mercedes power. Now Honda is gearing up to return in 2015 with a new turbocharged V6 hybrid powertrain it's supplying initially to McLaren, which in turn is switching back to Honda from nearly two decades with Mercedes.
So why return to F1 now? That's precisely what Autoblog asked Honda's Global President and Chief Executive Takanobu Ito (pictured above with McLaren chief Martin Whitmarsh) while visiting his office in Tokyo. While he wouldn't reveal specifics (like when his company's new engine would be available to other teams, as it most certainly will in the long run), Ito-san was clearly happy to discuss the motivation behind the move and the value he feels it brings to the company and its products.
Ito pointed toward the proliferation of motors within Honda's powertrains as a development he hopes to take to road from track

2015 Honda CR-V

Tue, Mar 10 2015

Honda sold 335,000 CR-Vs in 2014, meaning the long-running compact CUV accounted for one in every four Honda-badged vehicles sold. And honestly, it's not too difficult to see why. It's efficient, comfortable, reasonably well equipped and reliable, much as it has always been. While it's arguably the least-exciting entry in what is, to be frank, a fairly dull class, the CR-V has always been remarkably competent at being all the vehicle its customers could possibly need. The facelifted 2015 model is all of those things and more, as we found out during a full week at the helm. Honda has been remarkably consistent in the slow evolution of the CR-V's styling over the years. If you were to compare the rear of the third-generation model (released way back in 2007 and updated in 2010) with the back of this fourth-generation version (released in 2012 and freshened for this most recent model year) you'd be hard pressed to tell one from the other. The 2007 model featured tall taillights that got wider at the bottom, while a low rear bumper, large aperture and upright tailgate made access to the rear cargo area a piece of cake... just like the 2015 model shown above. Honda has been more progressive in front for its new CR-V, however, retaining the same wide, canted headlights and three-slat grille that first appeared in 2012, but this time lining them in LED accents (as is the trend nowadays). As for the interior, the material quality is easily among the best in this fiercely competitive segment, with soft, attractive dashboard plastics. We aren't crazy about the faux leather stitching, although that's true on a lot of vehicles in this class. Other accents, like the thin strip of faux wood at the bottom of the dash, look good and have a quality feel. The leather-wrapped steering wheel is a nice item, too, and we couldn't be happier about Honda's decision to replace the old-fashioned ruched leather on the seats with cleaner, tauter hides. Those seats are quite wide and comfortable, as well, although they aren't exploding with side support for cornering (it's a Honda CR-V, after all). Visibility is excellent fore, aft and laterally, regardless of how you set up the seat. In back, leg and headroom are both in abundance, while the bench seat should prove adequate throughout a family's normal use, or on long drives. That isn't to say there aren't problems in the cabin, though.

Acura replaces chief Accavitti with designer Ikeda

Tue, Jul 28 2015

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.