2012 Honda Rtl on 2040-cars

Auto blog

Honda CR-V caught wearing facelift in Europe

A few years on from its 2011 debut, the current Honda CR-V is preparing to go under the knife for a refresh. Typical of these sort of mid-cycle deals, the changes for Honda's popular CUV are minor.
The front of the car is home to the most dramatic (a relative term here) changes, with revised headlights sporting what looks like a slimmer profile. The three-bar grille has been heavily tweaked and is now a two-bar item, with a larger lower bar and a nose badge that covers both upper and lower sections.
The fascia itself has been modified with what looks like a larger lower intake, while the foglights have gone from the circular pattern of the current car to a rectangular pattern on the facelifted model. It looks like they'll still sport conventional bulbs, although the shape of the lights themselves look like a natural fit for a set of LED running lights (as is the trend).

Honda recalls select 2013 Accords over fuel tank neck

Honda and the National Highway Traffic Safety Administration have announced a recall for 1,659 model-year 2013 Honda Accord vehicles. The affected Accords are Low-Emission Vehicle II rated cars manufactured between January 15 and April 5 of 2013.
The recall is pursuant to a fuel tank neck that might be out of specification, and the variance could result in the fuel pump not properly sealing with the fuel tank. As you might guess, a bad seal here could result in a gasoline leak, posing a fire risk. As of this writing, there have been no reports of fires because of this problem.
Honda will reach out to owners of affected 2013 Accords, directing dealers to replace the cars' fuel tank, nut and O-ring gasket. Expect the notifications when the recall begins in earnest on August 1. FInd the full NHTSA press release below.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.