Killer Deal - Brand New - Never Title - Honda Fit Sport on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Junkyard Gem: 2000 Honda Passport 4WD

The suits at American Honda Motor Company must have spent the bulk of the 1990s tearing out their hair in frustration as their rivals raked in big money from the sales of ever-more-profitable SUVs, even as American car shoppers lost interest in sedans and hatchbacks. Oh, sure, the Civic-based CR-V appeared here for the 1997 model year and sold well enough, but the lack of a larger SUV pained Honda more with each passing year. With the Acura MDX and Honda Pilot not ready for showrooms until the 2001 and 2002 model years, respectively, some stopgap had to be found. Isuzu stepped up and made a deal with Honda: the Rodeo would get Honda badges and become the Passport, while the Trooper would show up in Acura showrooms with SLX badges (for the 1994 and 1995 model years, respectively). Here's one of those Passports, found in a Denver-area self-service yard. Things got even weirder in the Isuzu/Honda world around the turn of the century, with the Honda Odyssey getting Isuzu badges and being sold as the Oasis. Fast-forward to 2009, and the only Isuzu-badged vehicles available new here were rebadged Chevrolets: the I-Series pickup (Chevy Colorado) and the Ascender (Chevy Trailblazer). The Passport name has some interesting American Honda history, stretching back to the first Honda vehicle sold here (and the biggest-selling motor vehicle in human history): the Super Cub. American Honda Motor Company couldn't use the Super Cub name on our shores, because Piper Aircraft had been selling a small plane called the Super Cub since 1949, so the motorcycle was called the Honda 50 over here. Eventually, this bike got a 70cc engine and became the Honda C70 Passport, sales of which continued through the middle 1980s. That means the Passports sitting in your local Honda dealership right now got their name from a one-cylinder motorcycle. General Motors has a Passport connection as well; when GM created the Geo brand to sell rebadged Isuzus, Suzukis, and Toyotas in the United States, it created a marque called Passport to sell the Daewoo LeMans as the Optima in Canada (all the other vehicles sold by Passport dealers were Isuzus). So, Honda's need to offer SUVs in its American dealerships led to an arrangement with GM-connected Isuzu to sell these trucks with a model name bearing links to both companies. So much history in the junkyard! Just as Geo-badged Toyota Corollas (mostly) got Delco radios, so did the Passport get Honda radios.

Honda CR-Z carbon-fiber prototype

When Honda rolled out the CR-Z a few years ago, it hoped to bridge the gap between those who would save the planet and those who would rather burn all of its resources in a glorious cloud of tire smoke. But enthusiasts recalling the CRX of 1980s vintage balked, imploring Honda to ditch the heavy battery packs and electric motors in favor of a lighter-weight, more conventional powertrain. At this point it seems less likely that Honda would do so at one end of the market than Porsche would ditch the hybrid component of its 918 Spyder at the other. But that doesn't mean Honda isn't still cooking up ways to curb the CR-Z's weight. And it had just one such idea waiting for us when we visited its Japanese R&D center at Tochigi last week.
Nestled in between the JDM hatchbacks, powertrain test mules and new technology prototypes Honda rolled out for us sat the experimental CR-Z you see here. While it may look mostly like the hybrid sport-hatch you can pick up at your local dealer (albeit blacked out), nearly all of this prototype's bodywork has been completely replaced, as have its basic underpinnings, with carbon-fiber reinforced plastic. The exotic material is usually reserved for high-end exotics, but like BMW is democratizing its use in the new i3, so too is Honda researching ways to implement the use of carbon fiber on a mass scale. This one-of-a-kind CR-Z prototype stands, for the time being, as the embodiment of that effort.
Driving Notes