***** 2012 Honda Fit Sport 5 Speed 40+ Mpg ***** on 2040-cars

Auto blog

Renewed deal continues to give Honda power to Ariel models

You can expect to hear screaming Honda engines in Ariel's stripped down vehicles for even longer; the two companies have just reaffirmed their exclusive powerplant supply deal in the UK. Ariel's models have used Honda power for the last 16 years. Just in time for the updated agreement, the eight technicians at the sports car brand's tiny factory just completed their 1,500th model with the Japanese automaker's high-revving engine. The basic Atom in the UK comes with the naturally aspirated 2.0-liter K20Z engine, and Ariel fits the mill with an exhaust and custom ECU tuning to make 245 horsepower. An optional supercharger can push the output to 310 hp or up to 350 hp. The top versions can reach 60 miles per hour in less than 2.7 seconds and a top speed over 155 mph. Ariel's other products have different Honda powerplants. The company's new Nomad uses a 2.4-liter K24 with 235 hp, and an optional supercharger can give the off-roader 290 hp. For those that prefer two wheels, the Ace motorcycle packs a 1,237cc V4 with 173 hp. In the US, the Atom wasn't always available with Honda power. Brammo, which previously imported the sports cars here, fitted them with a 2.0-liter EcoTec four-cylinder engine from General Motors. Ariel toyed with other powerplants, too, like its 500-horsepower V8 in the Atom 500. HONDA (UK) AND ARIEL RENEW EXCLUSIVE ENGINE SUPPLY DEAL AS 1,500TH HONDA-POWERED ARIEL ROARS OUT OF THE FACTORY Honda (UK) and Ariel renew exclusive engine supply deal as 1,500th Honda-powered Ariel roars out of the (very small) factory Honda (UK) and Ariel Motor Company renew exclusive engine supply deal for Atom and Nomad 1,500th Honda-powered Ariel in 16 years roars out of the factory Supercharged Civic Type R engine delivers a scorching 350bhp and top speed of more than 155mph in the famed Ariel Atom Honda (UK) and Ariel Motor Company have renewed their 16-year strong exclusive engine supply agreement which sees the famed Atom powered by the Civic Type R engine, and the new off-road Nomad by the Civic 2.4 unit. The news comes as the two brands celebrate the 1500th Honda-powered Ariel roaring out of the small factory in Somerset, where just eight highly skilled build technicians spend 100-200 hours painstakingly hand-crafting one vehicle each at a time, from start to finish. Over the last 16 years 1,500 new Ariels have been built here – just a few day's work for Honda's Civic-producing Swindon plant.

Honda marks 20 million vehicles made in the USA

Japanese automakers manufacturing in the United States is nothing new. But it was in November of 1982 when the first Honda Accord rolled off the assembly line in Marysville, OH. It was the first Japanese vehicle assembled in the US, and in the nearly 32 years since, Honda has made 10 million Accords here for a total of 20 million cars manufactured in America - enough to span from New York to San Francisco twenty times. It's that double landmark which Honda is now celebrating.
Honda has come a long way in those three decades, keeping that original plant in Marysville on line while expanding to three more - in East Liberty, OH; Lincoln, AL; and Greensburg, IN - with a fifth plant (the Performance Manufacturing Center) opening on the same site in Marysville to build the Acura NSX next year. It also builds engines in Lincoln and in Anna, OH, and automatic transmissions at Russells Point, OH, and Tallapoosa, GA.
Between those seven sites, Honda produces 11 different models, including the Accord, Civic, Crosstour, CR-V, Pilot, Odyssey and Ridgeline as well as the Acura ILX, TL, RDX and MDX. Production keeps on ramping up as Honda produced a record 1.3 million vehicles in the US last year, 95 percent of which are sold in the US. Scope out the details in the press release below and click the image above to see it all laid out in a handy infographic.

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.