2010 Honda Civic Lx Sedan Automatic Cruise Control 42k Texas Direct Auto on 2040-cars

Auto blog

Honda signs on as Pikes Peak sponsor, race participant

Honda plans to storm the Pikes Peak International Hill Climb on June 30, entering ten cars in nine classes at the race to the sky, and signing on as a corporate sponsor. Part of the company's return to grassroots racing - if that's what you can call factory-backed efforts - the banners of Honda R&D and Honda North America will fly on these entries: a first-gen Acura NSX, an Acura TL SH-AWD, Honda CR-Z, Honda Fit EV, one CRF450R and two CRF250R motorcycles, a CBR1000RR motorcycle and a TRX450 ATV.
One more entry, details of which are to be announced later, will be driven by IndyCar pilot Simon Pagenaud of Schmidt Hamilton HP Motorsports. LoveFab (pictured above during practice last year) will be there with its new, NSX-based Enviate, but as a privateer entry.
Honda's been to the mountain before, with high-powered gear in 2012 and record-setting EVs in 1994 and 1999, but it's never made noise like this. Have a read of the press release below for more info.

Recharge Wrap-up: Honda FCV Concept comes to Detroit, Toyota seeks young green energy fellows

Honda will bring its FCV Concept to the 2015 North American International Auto Show in Detroit in January. The hydrogen-powered concept made its Japanese debut in November, and will now make its way to North America for the first time. The FCV concept improves upon the design of the FCX Clarity with a more striking appearance and roomier interior. Its smaller powertrain packaging means more space for people, and the FCV Concept seats five passengers. Honda also expects the next-generation fuel-cell car, which is scheduled to go on sale in Japan in March 2016, to cost less and have a range of over 300 miles. Read more in the press release below. The Mercedes-Benz B-Class Electric Drive has been awarded an environmental certificate from the TUV Sud technical inspection authority. The certificate is based not just on the vehicle's operation, but the entire lifecycle of the car, including production and recycling. The B-Class Electric Drive produces 24 percent less CO2 over its lifecycle than the Mercedes-Benz B180 when using the EU electricity mix, and 64 percent less when powered by hydroelectricity. Mercedes credits not just the use of electricity, but also the car's energy management system - such as its radar-based regenerative braking - for its carbon reductions. Read more in the press release below. Scania will test a wirelessly charged plug-in hybrid bus in Sweden. Beginning in June 2016, the bus will be put to daily use in Sodertalje. One of its stops will have a wireless charging station where the bus will recharge for six to seven minutes before continuing on its route again. The charger is located under the road surface and the bus positions itself above it to charge inductively. About $1.3 million will come from the Swedish Energy Agency to fund the test project, which could save up to 90 percent of fuel costs. If expanded to a fleet of 2,000 buses, it could save up to 13 million gallons of fuel each year. Read more at Green Car Congress, and in the press release below. Sandia National Laboratories and Linde are teaming up to expand hydrogen fueling infrastructure. The two groups have signed an agreement to research and develop new hydrogen stations, as well as ways to make fuel cell vehicles more desirable for consumers. They are looking at ways to incorporate hydrogen into existing fuel stations where possible, and make sure that it is able to be done safely.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.