2010 Honda Civic Lx Sedan Auto Leather Cruise Ctrl 39k Texas Direct Auto on 2040-cars

Auto blog

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

Honda planning sub-NSX S2000 successor

Nine years separated the arrival of the original Acura NSX and the Honda S2000. By that time, the NSX was closer to the end of its fifteen-year production cycle than it was to its beginning. The latest word has it that not only is Honda planning a successor to the S2000, but it's not about to wait that long after the new NSX arrives before it's rolled out.
While the S2000 was a front-mid-engined roadster, its successor will, according to the latest from Auto Express (which we are taking with a grain of salt), be a mid-engined coupe - closer, in other words, to the NSX than the S2000. Power would come from a more potent version of the 2.0-liter turbo four developed for the upcoming new Civic Type R, possibly as part of a hybrid system derived from Honda's upcoming Formula One powertain to develop over 400 horsepower.
Whether the new sports car would revive the S2000 nameplate, and whether it would wear the Honda or Acura badge in the United States, remain to be seen. As does its potential production site: while the previous S2000 was built at the same Takanezawa plant in Tochigi as the original NSX, the new NSX will be built at the new Performance Manufacturing Center in Marysville, Ohio. The new S660 roadster, meanwhile, is set to be assembled at the same Yachiyo plant in Yokkaichi as the original Honda Beat.

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.