California Car, New Clutch, New Paint, One Lady Owner Since New, Time Capsule on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Honda will build 2014 Accord Hybrid in Ohio

Honda has announced that it will invest $23 million in its Marysville, Ohio facility to support production of the upcoming 2014 Accord Hybrid sedan. According to the manufacturer, this means approximately 50 new jobs will be created, and the whole investment will result in a 95,000-square-foot expansion of the Marysville plant.
The Accord Hybrid joins the decidedly homely Accord PHEV (pictured) this fall, using a 2.0-liter i-VTEC Atkinson cycle four-cylinder engine mated to a 124-kilowatt electric motor. Honda has yet to release official power or fuel economy figures for the non-plug-in hybrid version of the Accord.
Honda currently operates four manufacturing facilities in Ohio, with the combined capacity to build up to 700,000 cars and light trucks each year. The Japanese automaker also has a facility in Greensburg, Indiana, where the Civic Hybrid and Acura ILX Hybrid are built.

Honda recalls 2.23 million vehicles to replace Takata inflators

The Basics: Honda and Acura will recall 2.23 million vehicles in the US. The affected models are: 2005-2012 Acura RL 2007-2011 Honda CR-V 2007-2016 Acura RDX (early production MY 2016 vehicles only) 2007-2014 Honda Ridgeline 2009-2014 Honda Fit 2009-2014 Acura TL 2010-2014 Honda FCX Clarity 2010-2014 Honda Insight 2010-2013 Acura ZDX 2011-2015 Honda CR-Z 2013-2016 Acura ILX (early production MY 2016 vehicles only) The Problem: These vehicles have Takata's PSDI-5 airbag inflator on the driver's side, and this part could rupture if the airbag deploys. Injuries/Deaths: There are no reported ruptures of the PSDI-5 inflator in Honda or Acura vehicles. However, Takata's exploding components have links to at least 10 deaths worldwide because they can spray shrapnel at occupants. The Fix: Honda and Acura dealers will replace the inflators with parts from an alternative supplier. If You Own One: The repairs will begin this summer. Owners will receive a letter notifying them about the recall within 60 days and will get a second message when the parts are available. The company will prioritize older models in high-humidity regions first because these inflators would be most likely to rupture. More Information: Honda and Acura have now recalled 8.51 million vehicles in the US to replace their driver or passenger side inflators. This latest expansion came in the wake of a driver death from an airbag rupture in a Ford Ranger. Ford and Mazda already enlarged their safety campaigns. The National Highway Traffic Safety Administration also announced Audi, BMW, Daimler Vans, Mercedes-Benz, Saab, and Volkswagen would have recalls for this issue, too. Statement by American Honda Regarding Nationwide Recall of Certain Takata PSDI-5 Driver Front Airbag Inflators Feb 3, 2016 - TORRANCE, Calif. Approximately 2.23 million Takata PSDI-5 driver front airbag inflators will require replacement in Honda and Acura vehicles in the U.S. No PSDI-5 inflator ruptures have been reported in Honda or Acura vehicles Takata inflators will be replaced with parts from an alternative supplier with repairs beginning in the Summer of 2016 Based on a recent Defect Information Report (16E-005) from the airbag inflator supplier, Takata, Honda will conduct a national recall (16V-061) of approximately 2.23 million Honda and Acura vehicles in the United States to replace, free of charge to vehicle owners, the PSDI-5 Takata driver front airbag inflators installed in those vehicles.