Ex-l Suv on 2040-cars

Auto blog

SAE World Congress: Testing out the Honda UNI-CUB, Walking Assist Device

Based on the downstairs display at the 2015 SAE World Congress in Detroit this week, you would think that Honda is barely an automaker. Instead, it was a company that focuses on robots, bizarre unicycles, motorcycles, and jets. We were not adverse to the car-related tech on display upstairs, but we wanted a closer look at the UNI-CUB and the Walking Assist Device. The UNI-CUB is one of the strangest vehicles we've ever experienced. It feels telepathic, because when you're sitting on it and think you want to go forward, your body naturally leans and then the UNI-CUB starts to move. The UNI part of the name stands for unicycle, but that's kind of a misnomer, since this thing has more than one wheel. First off, there's a tiny wheel for balance at the rear, but the main wheel itself is made up of multiple smaller wheels, which Honda calls the Omni Traction Drive System. This is what lets the UNI-CUB move side to side instead of just frontwards and backwards. The Walking Assist Device is a small setup with motors, leg straps, and a battery pack. The idea is to have the machine help lift up your legs as you walk, with the target audience being people who have had an injury, like a stroke. The WAD sits outside your clothes and can help someone walk for about an hour from a 22.2V-1Ah lithium-ion battery. You can see more in the video above.

Mid-engine Honda sports car surfaces in EU patent drawings

Based on new patent drawings, Honda clearly isn't done with sports cars. The design you see above was registered and published by the European Union Intellectual Property Office (EUIPO) and was first reported by AutoGuide. The drawings show a rakish, angular sports car design that is very clearly mid-engine. It could almost pass for a Lamborghini. But the name on the design is Honda Motor Company, and aside from the name, it bares a strikingly similar appearance to a mid-engine design found in a Honda patent two years ago. In fact, the only major difference between this car and the older one (seen below) is the lack of a windshield and top. The shape of the lights and the grille, as well as the front fender vent and character lines running from it, are reminiscent of the S660 kei roadster for Japan. The large, angular intakes look more related to the Acura NSX, though. View 6 Photos Unlike the previous patent renderings of the car, this one has an interior, and the inclusion of it may be why the top and windshield are absent. The interior also leads us to believe that this design is for an upcoming concept. The steering wheel is a small, rectangular piece similar to what you would find in an F1 car or Indy car. The seats also look like thin buckets designed to be as sporty and light as possible. A production version would probably have a bit more cushioning and a round wheel. It does look like there is a pushbutton transmission setup in the center console like current Acuras, though. So what does this mean? Honda is clearly still working on this design, and based on some of the more radical design choices for the interior, we're likely looking at a concept car that will show up in the next couple of years. Whether a concept will lead to a production car is tough to say. There's definitely room in Honda's global sports car roster between the S660 and NSX for something in between, and Honda has reported that it's getting pressure from dealers for sporty cars. The exterior design isn't so extreme it couldn't be tweaked for production, either. There have also been rumors that Honda is preparing a mid-engine hybrid sports car with the Type R's turbocharged four-cylinder. Honda also holds a trademark for the name "ZSX," which fits the naming scheme of the NSX and old RSX, but at least in Europe, Honda has held the trademark since 2009. We'll just have to wait and see what Honda does.

Bosch builds an infotainment system that just might not suck

As far as we've come with in-car infotainment and interfaces over the past decade or so, we still have a long way to go — as most current systems show. Whether it's high-end brands like Mercedes-Benz with its kludgy COMAND system, which we hope will be replaced with the MBUX platform revealed at CES, or more mainstream vehicles like Hondas (with their frustrating, knobless Display Audio interface), getting the kind of content and ease of use in the car that we're used to having on other connected devices is far too complex and sometimes costly. While Apple and Google have tried to ride to the rescue with CarPlay and Android Auto, respectively, they're limited solutions. No automaker or tech supplier has been able to deliver an easy, economical, flexible and non-distracting infotainment solution. But Bosch could be closing in on this elusive goal, given the digital cockpit concept demo I recently received at CES. Displayed in a Cadillac Escalade, the concept featured five interconnected color screens: one in the instrument cluster, two in the center console, and two more in the front-seat headrest for second-row passengers. The digital cockpit concept demo had cool features such as haptic-feedback touch-screen controls that created an edge-like feeling similar to a physical button, facial recognition to confirm driver credentials, and the intelligence to know the location of a phone in the car to lock it out to keep the driver from texting. The most significant aspect of the Bosch digital cockpit concept wasn't visible — but shows the company's vision for a future of seamless, convenient, cost-effective and safe in-car infotainment. It's powered by a single electronic control unit (ECU) that can simultaneously run multiple operating systems and also separates vehicle and infotainment controls for critical safety and cybersecurity reasons. Most modern cars can have as many as 100 separate ECUs, Philip Ventimiglia, product manager for Bosch Car Multimedia North America, explained at CES, and several just for infotainment functions. "The goal is to reduce that to about 10 so that we can save cost throughout the vehicle and enable new technologies," he added. "OEMs want to put more technology into cars, but it costs money," Ventimiglia said.