2023 Honda Cr-v Sport on 2040-cars

Auto blog

Honda recalls small number of 2016 CR-V models for airbags

Thought you'd heard the last bit of news regarding exploding airbags from Takata? Think again. Honda has issued a recall for the 2016 CR-V to replace driver-side front airbag modules. Fortunately, only 515 vehicles are covered by this recall, and only 30 affected models were actually in the hands of consumers. And, if you own a 2016 CR-V and haven't gotten a phone call from Honda, you're apparently in the clear. On October 10, 2015, an airbag inflator made by Takata ruptured in Monclova, Mexico, while being tested. Two days later, Takata notified Honda and the National Highway Traffic Safety Administration, prompting this recall. According to Honda's official announcement, though, this faulty inflator is not believed to be the same issue that caused automakers around the globe to recall 19.2 million (and counting) vehicles to replace defective airbag modules that were also made by Takata. Whether that's comforting or not, we'll let you decide. We've included both the official recall notice from NHTSA and the statement from Honda below. Here's hoping the faulty inflator that caused this recall was nothing more than a single defective part. Related Video: RECALL Subject : Driver Side Air Bag Inflator may Rupture Report Receipt Date: OCT 29, 2015 NHTSA Campaign Number: 15V714000 Component(s): AIR BAGS Manufacturer: Honda (American Honda Motor Co.) SUMMARY: American Honda Motor Company, Inc. (Honda) is recalling certain model year 2016 CR-V vehicles manufactured October 12, 2015, to October 19, 2015. The metal housing surrounding the driver's air bag inflator in these vehicles may have been manufactured incorrectly. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Honda will notify owners, and dealers will replace the driver side frontal air bag module, free of charge. The recall is expected to begin December 4, 2015. Owners may contact Honda customer service at 1-800-999-1009. Honda'a number for this recall is JV9. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Statement by American Honda Regarding Driver Front Airbag Module Recall: 2016 Honda CR-V Oct 30, 2015 - TORRANCE, Calif.

Honda recalling small number of Accord, CR-V models

This latest recall may not be a very big one, but it does strike us as an important one. Issued by Honda, the recall affects the 2014-15 Accord (specifically those equipped with the four-cylinder engine) and the 2015 CR-V, but only 137 of them. Those 137 vehicles, however, will need to have their short blocks replaced. What is a short block, you ask? Nope, it's not a chopped-down version of a big block: it's the engine block itself plus all its internal components, but short of any appendages that make it run. (That'd be a long block.) The problem, according to the manufacturer's statement below, stems from bolts – specifically the connecting rod bolt – that may have been improperly torqued during assembly. There's a system that's supposed to check that, but Honda reports that it "may not have identified improperly torqued bolts in a specific group of engines." Hence the recall. Owners of those few vehicles affected can expect to hear from the manufacturer to arrange bringing their vehicle into their local dealership to have the engine replaced, free of charge. Statement by American Honda Regarding Connecting Rod Bolt Recall: 2014-2015 Honda Accord 4-cylinder; 2015 Honda CR-V Mar 9, 2015 - TORRANCE, Calif. - 137 model-year 2014-15 Accord 4-cylinder and 2015 CR-V vehicles affected in the U.S. - Engine short block will be replaced in affected vehicles, free of charge - No related crashes or injuries have been reported Honda will voluntarily recall 137 model-year 2014-2015 Accord 4-cylinder and 2015 CR-V vehicles in the United States to replace the engine short block, free of charge. During engine assembly, an automated system that verifies engine connecting rod bolt torque may not have identified improperly torqued bolts in a specific group of engines. An improperly torqued connecting rod bolt could come loose, leading to potential engine damage and stalling, which could contribute to a crash. No crashes or injuries have been reported related to this issue, which was discovered through a warranty claim review process. Honda is announcing this recall to encourage all owners of affected vehicles to take them to an authorized dealer as soon as they receive notification of this recall from Honda. Mailed notification to customers will begin in late-March. In addition, owners of these vehicles can determine if their vehicles require repair by going to www.recalls.honda.com or by calling (800) 999-1009, and selecting option 4.

Honda's 3D-printed customizable EV has motorcycle bones

Honda isn't the first company to reveal vehicles with 3D-printed panels, details and more. However, it's certainly one of the biggest, so its efforts warrant a closer look. Fresh off the heels of the Paris Auto Show, Honda showed off its Variable Design platform for micro EVs: petite cars where space -- and weight -- is at a premium. The automaker wants to offer a vehicle with a customizable layout where drivers can choose what they need. That could be lowered entry points at the doors for senior drivers, a hatchback trunk for delivery vehicles or space for a family of three. (Somehow!) Let's take a closer look: I was a bit skeptical of the idea of an entire vehicle built from 3D-printed panels, but a Honda spokesperson outlined how the company took design and engineering know-how from its motorcycle division, resulting in a light but safe pipe-based skeleton under the paneling. This is apparently what gives the "micro commuter model" structural integrity. The company had some assistance from design firm Kabuku, which put a bird on it -- on the hatchback trunk, as well as the doors and seat. The car mostly has that familiarly, rough 3D-printed surface to it, but despite being the early first step in Honda's efforts to offer a heavily customizable electric vehicle, today's prototype could very much move. A handful of journalists and businessmen got to sit inside and drive it very briefly around a corner in a faux-Japanese village. 3D-printing entire car bodies could lead to reduced design times and cheaper costs. But that's if it becomes a bigger thing. For now, it's a promising platform that's still in development.This article by Mat Smith originally ran on Engadget, the definitive guide to this connected life. Green Honda Technology Emerging Technologies Electric