2022 Honda Cr-v Ex-l on 2040-cars

Auto blog

Honda Civic Tourer sports forbidden facelift

Following up on a sextet of spy photos from June, we now have another batch of images of the facelifted Euro-spec Honda Civic undergoing testing in the United Kingdom. There's a bit more sheetmetal to this particular prototype, though, as our spy photographers have caught the upcoming Tourer model (pronounced "wagon" among us Yanks).
Like the hatchback we showed you last month, the new Tourer benefits from the same set of styling tweaks inspired by the Civic Type R Concept from March's Geneva Motor Show. That means it boasts a revised front fascia, albeit with a more heavily camouflaged version of the grille shown in last month's photos. It's a similar story below, where the intakes on this long-roof model wear more disguise, yet look to be virtually identical to what we've already seen.
While the headlights still look to be a straight lift from last month's car, the more upright nature of the Tourer's tailgate demands a more subdued character. Gone are the thin, curvy LED taillights, and in their place sit significantly more substantial units (with conventional bulbs), although they boast none of the design chutzpah shown on our last round of spy photos. Our spies claim LED taillights will be available, noting that they simply aren't fitted to this particular prototype, a distinction that suggests this is a lower-end model.

Bisimoto's 911 and Honda Odyssey each pack 1,000 hp

There aren't a lot of vehicles on the road that pack a thousand horsepower. The Bugatti Veyron and McLaren P1 are in rare company, but there have been a handful of aftermarket tuners that have managed to extract that much power out of lesser vehicles. Bisimoto is responsible for more than its fair share, so Matt Farah and the team at Drive stopped by the workshop in Southern California to check out the craftsmanship for the latest episode of Tuned. What they found is two vehicles with that astronomical four-figure output that otherwise couldn't be more different from each other. First up is the vintage, stripped-out 911 that company founder Bisi Ezerioha built for himself. It's based on a 1976 Porsche 911 Carrera with a widebody kit and a pair of turbochargers hanging off the back. The result is that thousand-horsepower output and, as Farah found out, one of the scariest, hairiest, and squirliest automobiles ever devised. As if that weren't enough, there's a thousand-horsepower minivan on the docket, too. This one is based on a Honda Odyssey, rebuilt on an air suspension and a six-speed manual gearbox conversion out of an Acura TL. And of course the engine's been tuned to deliver that headline output figure. Honda and Bisimoto showcased the vehicle at the SEMA show a couple of years ago, where Farah says he didn't think it could possibly hold together. But as he discovered in the video above, it actually does, and accelerates with tenacity... and plenty of room for the kids.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.