2014 Honda Cr-v Ex-l on 2040-cars

Auto blog

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.

2015 Mexican Grand Prix is a lot like old times

The last time Formula One visited Mexico, in 1992, 26 cars powered by eight engine manufacturers (counting Honda and Mugen-Honda separately) lined up on the grid; it would have been nine engine makers but the Brabham-Judd cars failed to qualify. In 1992 Lewis Hamilton was seven years old, Sebastian Vettel was five, Max Verstappen was still five years away from being born. Two of the current Sky Sports F1 commentary team, Martin Brundle and Johnny Herbert, were drivers. The starting three were Nigel Mansell on pole – 39 years old, this the year he'd win his only World Championship – and Riccardo Patrese both driving Williams-Renault cars, followed by Michael Schumacher in a Benetton-Ford. Only 13 of the 26 starters would finish. The circuit is has been reworked to today's safer standards, the track surface is brand new and slippery, but the atmosphere and packed grandstands haven't changed. Nico Rosberg was another point of consistency, scoring pole position for the fourth race in a row to beat his now-World-Champion teammate Hamilton by almost two-tenths of a second. The last time Rosberg turned pole position into a victory? The Spanish Grand Prix back in May. Vettel locked up third for Ferrari, followed by the Infiniti Red Bull Racing duo of Daniil Kvyat and Daniel Ricciardo. Williams went two-up as well, Valtteri Bottas in sixth ahead of Felipe Massa in seventh. Max Verstappen turned in a great late lap to reserve eighth place, Sergio Perez did all he could in front of his home crowd to get ninth, teammate Nico Hulkenberg the caboose in the top ten. In that 1992 race the first three on the grid finished the race in the same order after Mansell dominated, and it was almost the same in 2015. If Rosberg had driven the whole season like he drove today the Driver's World Championship would still be up for grabs. He got a great start and held his line through the first corner, coming out ahead of Hamilton through the initial kinks, pulling away as soon as he got to the straight. Hamilton was never more than a few seconds behind, but every time the Brit inched closer the German found a few more tenths to keep his distance. The field got bunched up when the Safety Car came out on Lap 53 after Vettel spun and got stuck in the barriers, but Rosberg handled the restart perfectly. Both drivers made small mistakes in the last few laps while driving on the edge, but Rosberg earned a strong victory, crossing the line two seconds ahead of his teammate.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.