2014 Honda Cr-v Ex on 2040-cars

Auto blog

2015 Honda CR-V

Predicting the future direction of Honda's compact CR-V would have been difficult based on the Civic-derived model that first arrived on our shores for the 1997 model year. The newcomer, selling alongside the body-on-frame Passport (a hastily rebadged Isuzu Rodeo), was a cute compact crossover with four doors and an awkward curb-side hinged tailgate thanks to its Japanese home-market design. The five-passenger CUV offered generous interior room, but its wheezy 2.0-liter four-cylinder, with an output of just 126 horsepower and 133 pound-feet of torque, required 11.7 seconds to bring the 3,153-pound vehicle to 60 miles per hour. Rear drum brakes didn't help much in the stopping department, but Honda offered safety-minded consumers optional anti-lock brakes on the premium trim.
Nearly two decades after its introduction, the CR-V has matured in spectacular manner. The refreshed 2015 Honda CR-V, now in its fourth generation, is dimensionally within two inches of its ancestor in overall length and nearly identical in height and wheelbase. That consistency of dimension is impressive in this age of size and segment creep, and it stands as a testament to how 'right' Honda engineers got the model's original packaging. Of course, the CR-V hasn't stood still - nearly everything else about the best-selling compact CUV has improved in leaps and bounds.
But Honda is not the only player in this hotly contested segment today, so the automaker has taken the unusual step of updating its fourth-generation model just a few years after its introduction in an effort to keep it seated on the podium. To learn more about the automaker's improvements, and form our own impressions, we spent a day driving the CR-V in sunny Southern California.

NHTSA expands new Takata probe to 4 more automakers

DETROIT — The U.S. government's highway safety agency has launched an investigation into four additional automakers that have a potentially deadly type of Takata air bag inflator in their vehicles but have yet to recall them. The National Highway Traffic Safety Administration said in documents posted Thursday that it is investigating Audi, Toyota, Honda and Mitsubishi in connection with a Takata recall involving 1.4 million inflators. This brings the total number of manufacturers potentially impacted to five, as BMW was connected to the issue when it was brought to light earlier in December. The inflators made by the now-bankrupt Takata have a distinct and separate problem that can cause them to blow apart a metal canister and spew shrapnel into people's faces and bodies. The problem killed a driver in Australia who was in an older 3-Series BMW, which has already recalled more than 116,000 vehicles. The problem is so dangerous that in some cases BMW has told drivers to park their vehicles until repairs can be made. The safety agency says in documents that Takata didn't provide details on the affected makes, models or model years of vehicles with the defective inflators. So it is telling the companies to recall them promptly. The agency says that based on when the faulty inflators were produced, it's likely that the vehicles to be recalled came from the 1995 through 2000 model years. In letters to all four automakers, NHTSA says they have five business days to notify the agency after finding out about a safety defect. “If your company has not yet gathered enough evidence to make a determination that the subject air bag inflators present an unreasonable risk to motor vehicle safety, reply with a detailed work plan including the benchmark dates required to make the determination,” the agency wrote in letters to all four automakers dated Wednesday. A Honda spokesman said Thursday it hasn't determined yet whether its vehicles are affected, but a decision should be made soon. Audi, Mitsubishi and Toyota said they are still investigating. NHTSA has told the companies to respond by Jan. 17. On Dec. 4, NHTSA posted documents from Takata and BMW detailing the problems. The documents said the Australian driver was killed, while another Australian driver and a driver in Cyprus were injured. Unlike previous recalls, the Takata non-azide inflators do not use volatile ammonium nitrate to fill the air bags in a crash.

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.