2006 Lx Used 2.4l I4 16v Automatic Suv on 2040-cars

Auto blog

Honda installs 3-minute, fast-fuelling hydrogen fuel station in California

OK, but let's see how well Honda can control hydrogen refueling temperature in Houston or Buffalo. That's what some pessimists may be saying now that the Japanese automaker has installed a fast-fueling hydrogen station in the oh-so-temperate environs of Torrance, CA. That city is about 20 miles southwest of downtown Los Angeles and a sliver of it actually touches the Pacific Ocean, so we're not talking about wild swings in air temperature here. Honda is calling its fast-refueling platform the MC Fill (we'd expect a lawsuit if it was McFill, even though that'd be clever) and says that filling up takes about 45 percent less time than the typical hydrogen-refueling station. That's because the system monitors the ambient temperature in order to speed up the process. There's more scientific stuff in there - for example, the fact that the MC name comes from the "two key values in a heat transfer equation- 'M' for mass and 'C' for specific heat" - but the long and the short of it is that a hydrogen fuel-cell vehicle can fill up in less than three minutes. That's pretty impressive, despite the distinct lack of vehicles needing to charge that fast today. Honda unveiled its FCEV Concept vehicle at the Los Angeles Auto Show last November. The five-seat vehicle has a range of more than 300 miles, while its fuel-stack power density is about 60 percent higher than its previous version. The production version is due to arrive in the US in 2015. Check out Honda's press release below. Honda R&D Installs Advanced Fast-Fill Hydrogen Refueling Station -- New station on Honda R&D Americas' Torrance, California campus built in anticipation of Honda's next-generation fuel cell electric vehicle, due in 2015 -- Honda-developed hydrogen refueling protocol significantly reduces fill time TORRANCE, Calif., March 3, 2014 /PRNewswire/ -- Preparing for the 2015 introduction of the next Honda fuel cell-electric vehicle (FCEV), Honda R&D Americas has installed a state-of-the-art hydrogen refueling station on its Torrance, California campus. This advanced station will serve as a platform for demonstrating and validating the enhanced hydrogen fueling protocol developed by Honda, named the MC Fill. With the aim of standardizing this new protocol, Honda will make the new research station available to other automakers to further validate the MC Fill protocol's performance and functionality.

Honda's first production jet takes off from North Carolina

Plenty of automakers have backgrounds in aircraft manufacturing. BMW, Bristol, Mitsubishi, Saab and Spyker all started out in the airplane business. But Honda is going the opposite direction, expanding its automotive (not to mention motorcycle, ATV, marine engine and power equipment) business with the launch of the HondaJet. And that project has just taken a big step forward.
After starting production a year and a half ago, the Japanese industrial giant recently completed its first customer HondaJet, and has now taken that initial production aircraft to the skies for its landmark first flight. The aircraft left the production facility in Greensboro and took off on Friday morning from Piedmont Triad International Airport in North Carolina - the same state where the Wright Brothers undertook their first flight over a century ago.
The HondaJet undertook an 84-minute test flight, climbing to 15,500 feet and reaching a speed of 348 knots. That works out to 400 miles per hour - assuredly faster than any Honda (save for maybe a prototype for the same aircraft) has traveled before. The aircraft is designed to cruise at a maximum of 420 knots (483 mph) and reach a maximum altitude of 43,000 feet.

Honda S660 set for Yokkaichi production next year

Roadsters, you might argue, are best when they're small and nimble. If you're thinking of the Mazda MX-5 Miata, you're on the right track, but there have been even smaller ones: pint-sized, three-cylinder roadsters like the Daihatsu Copen, Suzuki Cappuccino and Smart Roadster. But the most iconic and enduring of them was surely the Honda Beat.
Designed by Pininfarina, the Beat was - not unlike the F40 was for Enzo Ferrari - the last car approved for production by company founder Soichiro Honda. It complied with Japan's strict Kei car regulations and packed a tiny, naturally aspirated 656 cc that produced just 63 horsepower. The cult classic ended production in 1996, but six months ago Honda hinted at a revival with the presentation of the S660 concept at the 2013 Tokyo Motor Show. Now it seems Honda - or Yachiyo, we should say - is gearing up to put it into production at the same factory that produced the Beat two decades ago.
That plant is the Yokkaichi factory, a facility owned by Yachiyo Industry Co., Ltd. that builds small cars on contract for Honda. It was slated for a major expansion a few years ago until Honda shifted some of its small car production to its own plant in Suzuka, but continues to build the N series of boxy, upright hatchbacks, as well as small commercial vehicles like the Life and Vamos lines. The reintroduction of a small roadster line to the factory's output sometime in 2015 will undoubtedly be a cause for celebration in Yokkaichi. For our part we can only hope that American Honda CEO Tetsuo Iwamura gets his way and manages to bring the S660 to the US in the near future.