Clean Carfax, Fully Loaded, Low Miles, *no Reserve* on 2040-cars

Auto blog

Honda CR-Z refresh coming this fall

Despite moving just 1,562 of them through July 2015 with sales down 33.7 percent, the Honda CR-Z is somehow still kicking in the US lineup. Honda isn't ready to give up and is even announcing a refresh for the hybrid hatchback in hopes of giving the little car a jolt. Before you get too excited, the powertrain remains unaltered for the update with the same 1.5-liter four-cylinder and IMA hybrid system making 130 horsepower. The refresh arrives in Japan in October, and according to Automotive News, the improvements arrive in the US in November. The styling sees the biggest change of the revisions. Up front, the lower air dam now slices through the grille and leads right to the foglights. A similar addition is found on the rear, as well. The brake discs grow to 15-inches, an inch larger than before. Japan gets LED headlights too, but they reportedly aren't coming here to keep prices down. To match the revised exterior, there are tech tweaks inside. An upgraded infotainment system that adds both noise cancelation and an engine sound amplifier to make those 130 ponies at least sound sporty. Another tiny change is the switch to an an electric parking brake and the addition of a center armrest. Rumors suggest Honda is considering whether to dump the hybrid in favor of a 2.0-liter turbocharged four-cylinder in the next-gen CR-Z. However, chief engineer Terukazu Torikai disagrees. When asked about the possibility of a non-electrified model, he told Automotive News, "There are no plans for that whatsoever."

Honda, Acura lay out future plans: HR-V and more coming in 2022

Automakers and PR representatives are notoriously tight-lipped about upcoming vehicles. The infamous line that all of us in the car news business are familiar with is, "We cannot comment on future product." But this week, Honda opened up a little bit and laid out its big reveals for the coming year, and it's going to be a busy one. It all starts with the 2023 Honda HR-V, shown in the renderings above. The company didn't share a whole lot of details since it was focusing on the broad product plans, but it did note that it will be "unique to North America." It's not clear if it's just styling, which is abundantly obvious compared to the European HR-V and Japanese Vezel shown below, or if it will have a different platform and powertrains. We suspect the latter, since looking at the renderings, not only does it have a meaner, more aggressive look, but the glass in the greenhouse is different, as are the door handles. The HR-V is only the start of the big product rollout. More SUVs follow starting with the new CR-V, and then the new Pilot. A new Accord is coming, and of course there's the imminent Civic Type R. Acura's rollout is a bit more modest, with the big launches being the new Integra and the Type-S version of the MDX. Honda HR-V / Vezel View 11 Photos Plug-in hybrids aren't part of the plan There's one thing that Honda isn't including in its plans, and that's plug-in hybrids. When asked why, American Honda's executive Vice President of National Operations Dave Gardner noted that public and governmental feelings have moved from just reducing emissions to eliminating them entirely. As such, the time and effort to develop plug-in hybrids doesn't make sense when that could be applied to fully electric cars. Conventional, non-plug-in hybrids are still planned, and Honda is expecting ever increasing hybrid sales in the next few years. The company is expecting half of Accord sales will eventually be hybrid. As for Acura, hybrids aren't planned to be a big part of sales, with the brand jumping straight to EVs. Speaking of EVs, Honda's first North American electric car is still planned to be the Prologue. It's the electric model that's going to be based on a General Motors product. It's slated for the 2024 model year, and Honda is anticipating around 70,000 annual sales for it to start. Acura will get a counterpart to the Prologue, which may be named ADX. Related video:

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.